Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder apm821xx/nand Build #254

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision5715b21f8066f85aa06ff131868e11a27cca5559
Got Revision5715b21f8066f85aa06ff131868e11a27cca5559
Changes10 changes

BuildSlave:

slashdirt-dock-02

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. dlfindbinpl downloading to findbin.pl ( 0 secs )
    1. - no logs -
  4. gcc property 'cc_command' set ( 0 secs )
    1. stdio
    2. property changes
  5. g++ property 'cxx_command' set ( 0 secs )
    1. stdio
    2. property changes
  6. setproperty property 'ccache_command' set ( 0 secs )
    1. stdio
    2. property changes
  7. dlexpiresh dlexpiresh skipped ( 0 secs )
    1. - no logs -
  8. expire Checking for build tree expiry skipped ( 0 secs )
    1. - no logs -
  9. dlcleanupsh dlcleanupsh skipped ( 0 secs )
    1. - no logs -
  10. cleanold Cleaning previous builds skipped ( 0 secs )
    1. - no logs -
  11. cleanup Cleaning work area skipped ( 0 secs )
    1. - no logs -
  12. tools/clean User-requested "make tools/clean" skipped ( 0 secs )
    1. - no logs -
  13. toolchain/clean User-requested "make toolchain/clean" skipped ( 0 secs )
    1. - no logs -
  14. target/linux/clean User-requested "make target/linux/clean" skipped ( 0 secs )
    1. - no logs -
  15. dirclean User-requested "make dirclean" skipped ( 0 secs )
    1. - no logs -
  16. distclean User-requested "make distclean" skipped ( 0 secs )
    1. - no logs -
  17. gitcheckout Ensure that Git HEAD is sane ( 0 secs )
    1. stdio
  18. gitclean update skipped ( 0 secs )
    1. - no logs -
  19. gitfresh update ( 13 secs )
    1. stdio
  20. fetchrefs Fetching Git remote refs ( 0 secs )
    1. stdio
  21. switchtag Checking out Git tag skipped ( 0 secs )
    1. - no logs -
  22. gitverify Ensure that Git HEAD is pointing to a branch or tag ( 0 secs )
    1. stdio
  23. rmtmp Remove tmp folder ( 0 secs )
    1. stdio
  24. rmfeedlinks Remove feed symlinks ( 0 secs )
    1. stdio
  25. ccachecc downloading to ccache_cc.sh ( 0 secs )
    1. - no logs -
  26. ccachecxx downloading to ccache_cxx.sh ( 0 secs )
    1. - no logs -
  27. updatefeeds Updating feeds ( 35 secs )
    1. stdio
  28. installfeeds Installing feeds ( 27 secs )
    1. stdio
  29. dlconfigseed downloading to .config ( 0 secs )
    1. - no logs -
  30. newconfig Seeding .config ( 0 secs )
    1. stdio
  31. delbin Removing output directory ( 0 secs )
    1. stdio
  32. defconfig Populating .config ( 21 secs )
    1. stdio
  33. checkarch Checking architecture ( 0 secs )
    1. stdio
  34. libc property 'libc' set ( 0 secs )
    1. stdio
    2. property changes
  35. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  36. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  37. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  38. dldir Preparing dl/ ( 0 secs )
    1. stdio
  39. dltar Building and installing GNU tar ( 1 mins, 25 secs )
    1. stdio
  40. dlrun Populating dl/ ( 29 secs )
    1. stdio
  41. cleanbase Cleaning base-files ( 14 secs )
    1. stdio
  42. tools Building and installing tools ( 3 mins, 20 secs )
    1. stdio
  43. toolchain Building and installing toolchain ( 10 mins, 13 secs )
    1. stdio
  44. kmods Building kmods ( 4 mins, 8 secs )
    1. stdio
  45. kernelversion property 'kernelversion' set ( 0 secs )
    1. stdio
    2. property changes
  46. pkgclean Cleaning up package build ( 13 secs )
    1. stdio
  47. pkgbuild Building packages ( 10 mins, 22 secs )
    1. stdio
  48. pkginstall Installing packages ( 25 secs )
    1. stdio
  49. pkgindex Indexing packages ( 21 secs )
    1. stdio
  50. stageroot property 'stageroot' set ( 2 secs )
    1. stdio
    2. property changes
  51. filesdir Creating file overlay directory ( 0 secs )
    1. stdio
  52. kmodconfig Embedding kmod repository configuration ( 0 secs )
    1. stdio
  53. images Building and installing images ( 7 mins, 24 secs )
    1. stdio
  54. buildinfo Generating config.buildinfo, version.buildinfo and feeds.buildinfo ( 18 secs )
    1. stdio
  55. checksums Calculating checksums ( 15 secs )
    1. stdio
  56. kmoddir Creating kmod directory ( 0 secs )
    1. stdio
  57. kmodprepare Preparing kmod archive ( 0 secs )
    1. stdio
  58. kmodindex Indexing kmod archive ( 18 secs )
    1. stdio
  59. signprepare Ran ( 0 secs )
    1. stdio
  60. signpack Packing files to sign ( 0 secs )
    1. stdio
  61. upload uploading sign.tar.gz ( 2 secs )
    1. - no logs -
  62. signfiles Ran ( 2 secs )
    1. stdio
  63. dlsigntargz downloading to sign.tar.gz ( 1 secs )
    1. - no logs -
  64. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  65. dirprepare Preparing upload directory structure ( 0 secs )
    1. stdio
  66. linkprepare Preparing repository symlink skipped ( 0 secs )
    1. - no logs -
  67. kmoddirprepare Preparing kmod archive upload directory ( 0 secs )
    1. stdio
  68. dirupload Uploading directory structure ( 1 secs )
    1. stdio
  69. target-sha256sums Fetching remote sha256sums for target ( 0 secs )
    1. stdio
  70. dlsha2rsyncpl downloading to sha2rsync.pl ( 0 secs )
    1. - no logs -
  71. buildlist Building list of files to upload ( 0 secs )
    1. stdio
  72. dlrsync.sh downloading to rsync.sh ( 0 secs )
    1. - no logs -
  73. targetupload Uploading target files ( 39 mins, 30 secs )
    1. stdio
  74. targetprune Pruning target files ( 2 secs )
    1. stdio
  75. kmodupload Uploading kmod archive ( 2 mins, 57 secs )
    1. stdio
  76. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  77. sourceupload Uploading source archives ( 0 secs )
    1. stdio
  78. df Reporting disk usage ( 0 secs )
    1. stdio
  79. ccachestat Reporting ccache stats ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/apm821xx_nand slave
buildername apm821xx/nand Builder
buildnumber 254 Build
cc_command /usr/bin/gcc-6 SetPropertyFromCommand Step
ccache_command /usr/bin/ccache SetPropertyFromCommand Step
codebase Build
cxx_command /usr/bin/g++-6 SetPropertyFromCommand Step
dl_lock None BuildSlave
do_cleanup True BuildSlave
got_revision 5715b21f8066f85aa06ff131868e11a27cca5559 Git
kernelversion 4.19.101-1-a8ad1348e053b046c9f21e0f6ceeef86 SetPropertyFromCommand Step
libc SetPropertyFromCommand Step
max_builds 1 BuildSlave
nproc 12 SetPropertyFromCommand Step
project Build
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 5715b21f8066f85aa06ff131868e11a27cca5559 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename slashdirt-dock-02 BuildSlave
stageroot /builder/shared-workdir/build/staging_dir/target-powerpc_464fp_musl/root-apm821xx SetPropertyFromCommand Step
ul_lock None BuildSlave
workdir /builder/apm821xx_nand slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Aleksander Jan Bajkowski
  3. DENG Qingfang
  4. Jo-Philipp Wich
  5. Mathias Kresin
  6. Michael Yartys
  7. Paul Spooren
  8. Tomislav Požega

Timing:

StartThu Feb 13 22:48:16 2020
EndFri Feb 14 00:12:13 2020
Elapsed1 hrs, 23 mins, 57 secs

All Changes:

:

  1. Change #1715

    Category None
    Changed by Jo-Philipp Wich <joohnoyoudont@mein.io>
    Changed at Wed 12 Feb 2020 17:01:13
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 04069fde19e86af7728111814afadf780bf08018

    Comments

    uhttpd: update to latest Git HEAD
    2ee323c file: poke ustream after starting deferred program
    
    Signed-off-by: Jo-Philipp Wich <jo@mein.io>

    Changed files

    • package/network/services/uhttpd/Makefile
  2. Change #1716

    Category None
    Changed by Mathias Kresin <devohnoyoudont@kresin.me>
    Changed at Wed 12 Feb 2020 21:15:14
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 35ab804ea7fa9e92a5e09f9a41a03768b3cd0a82

    Comments

    kernel: swconfig: make compatible with kernel 5.2
    Since kernel 5.2 within netlink messages the NLA_F_NESTED nested flag is
    validated. But swconfig/swlib doesn't set the flag for
    SWITCH_ATTR_OP_VALUE_PORTS related netlink messages and assigning ports
    to vlans via
    
      swconfig dev switch0 vlan 1 set ports '0 1 2 3 4 6t'
    
    Errors put with "Failed to set attribute: Invalid input data or
    parameter".
    
    Relax the validation rules and use the deprecated functions, to use the
    same level of validation as it was till kernel 5.1. Depending on who has
    swconfig related netlink messages implemented, there might be more
    broken tools out there and we should keep backward compatibility if
    possible.
    
    Signed-off-by: Mathias Kresin <dev@kresin.me>
    Tested-by: Rafał Miłecki <rafal@milecki.pl>

    Changed files

    • target/linux/generic/files/drivers/net/phy/swconfig.c
  3. Change #1717

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Thu 13 Feb 2020 16:33:20
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 49ff00db340ea017c266ba37546c71209cfe3e26

    Comments

    ath79: enable forceless sysupgrade from ar71xx on fritz300e
    This adds the ar71xx board name to the SUPPORTED_DEVICES on ath79,
    so forceless sysupgrade on this device becomes possible.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/image/generic.mk
  4. Change #1718

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Thu 13 Feb 2020 16:33:20
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision fbd00bb8d406a0ace7ea9c49a79cbad2418689a5

    Comments

    ath79: add support for TP-Link TL-WR940N v6
    The TL-WR940N v6 is similar to v3/v4, it just has different
    LEDs and MAC address assignment.
    
    Specification:
    - 750 MHz CPU
    - 32 MB of RAM
    - 4 MB of FLASH
    - 2.4 GHz WiFi
    - 4x 10/100 Mbps Ethernet
    
    The use of LEDs is based on ar71xx, so blue LED is used for WAN
    and orange LED for diag (boot/failsafe/etc.).
    
    Flash instruction (WebUI):
    Download *-factory.bin image and upload it via the firmwary upgrade
    function of the stock firmware WebUI.
    
    Flash instruction (TFTP):
    1. Set PC to fixed ip address 192.168.0.66
    2. Download *-factory.bin image and rename it to
       wr940nv6_tp_recovery.bin
    3. Start a tftp server with the image file in its root directory
    4. Turn off the router
    5. Press and hold Reset button
    6. Turn on router with the reset button pressed and wait ~15 seconds
    7. Release the reset button and after a short time
    the firmware should be transferred from the tftp server
    8. Wait ~30 second to complete recovery.
    
    Thanks to Manuel Kock for reviewing and testing this patch.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
    Tested-by: Manuel Kock <github.web@manu.li>

    Changed files

    • target/linux/ath79/dts/tp9343_tplink_tl-wr940n-v6.dts
    • target/linux/ath79/image/tiny-tp-link.mk
    • target/linux/ath79/tiny/base-files/etc/board.d/01_leds
    • target/linux/ath79/tiny/base-files/etc/board.d/02_network
  5. Change #1719

    Category None
    Changed by Aleksander Jan Bajkowski <A.Bajkowskiohnoyoudont@stud.elka.pw.edu.pl>
    Changed at Thu 13 Feb 2020 16:45:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 5499b24dc01918a1e46c365537a4b4a07909e984

    Comments

    sunxi: backport increased SATA/AHCI DMA TX/RX FIFOs
    This backports SATA performance boost from 5.3 kernel:
    
     Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie.
     TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each to
     0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s from
     lame 36 MiB/s to 45 MiB/s previously.  Read performance is above 200
     MiB/s. [tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf
     at 12K]
    
     dd bs  Before MB/s  After MB/s  Increase
     4k            14.4        16.5       15%
     64k           34.5        74.4      116%
     1M            40.5        93.2      130%
    
    Ref: https://forum.openwrt.org/t/sunxi-sata-write-speed-patch/54555/5
    Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
    [commit subject & description tweaks]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch
  6. Change #1720

    Category None
    Changed by Michael Yartys <michael.yartysohnoyoudont@protonmail.com>
    Changed at Thu 13 Feb 2020 16:45:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 67174adc94f239786316616f577da4e78328e3ea

    Comments

    ath10k-ct: update to 2020-01-29
    Changes:
    
    ath10k-ct: Support better RSSI measurements.
    
    When used with recent firmware, these changes allow the driver to
    query per-chain noise-floor from the radio to better calculate the
    per-chain RSSI. The per-chain RSSI is then summed to provide the
    'combined RSSI'. This gives better per-chain RSSI as well as combined
    RSSI, especially when running with more than 20Mhz bandwidths.
    
    Refresh patches.
    
    Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>  [ipq806x+qca9984,ipq4019+qca9986]
    Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>

    Changed files

    • package/kernel/ath10k-ct/Makefile
    • package/kernel/ath10k-ct/patches/161-ath10k-add-support-for-configuring-management-packet.patch
    • package/kernel/ath10k-ct/patches/162-ath10k-fix-possible-out-of-bound-access-of-ath10k_ra.patch
    • package/kernel/ath10k-ct/patches/163-ath10k-fix-incorrect-multicast-broadcast-rate-settin.patch
    • package/kernel/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch
    • package/kernel/ath10k-ct/patches/170-mac80211-pass-the-vif-to-cancel_remain_on_channel.patch
    • package/kernel/ath10k-ct/patches/201-ath10k-4.16_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
    • package/kernel/ath10k-ct/patches/202-ath10k-4.16-use-tpt-trigger-by-default.patch
    • package/kernel/ath10k-ct/patches/203-ath10k-Limit-available-channels-via-DT-ieee80211-fre.patch
    • package/kernel/ath10k-ct/patches/976-ath10k-Check-if-station-exists-before-forwarding-tx-.patch
  7. Change #1721

    Category None
    Changed by Michael Yartys <michael.yartysohnoyoudont@protonmail.com>
    Changed at Thu 13 Feb 2020 16:45:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 18622638831707038556b9b8bd5a0b4d4a53ce53

    Comments

    ath10k-firmware: update ath10k-ct firmware
    This supports better per-chain noise floor reporting, which in turn allows for
    better RSSI reporting in the driver.
    
    Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices).
    
    Wave-2 has fix for crash likely related to rekeying.
    
    Wave-1 has some debugging code added where a user reported a crash.
    
    Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>  [ipq806x+qca9984,ipq4019+qca9986]
    Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>

    Changed files

    • package/firmware/ath10k-firmware/Makefile
  8. Change #1722

    Category None
    Changed by Tomislav Požega <pozega.tomislavohnoyoudont@gmail.com>
    Changed at Thu 13 Feb 2020 16:45:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision cd5dbba9056faf5224561a82e7dec11ce2dbc8cd

    Comments

    mac80211: expose chanbw support to debugfs for ath9k_htc
    This will ensure the htc suffixed driver also gets created
    chanbw debugfs entry.
    
    Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>

    Changed files

    • package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
  9. Change #1723

    Category None
    Changed by Paul Spooren <mailohnoyoudont@aparcar.org>
    Changed at Thu 13 Feb 2020 16:45:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 73f3ad1df2e1d33d3d5aae4fd2093aa80406cc4a

    Comments

    build: fix empty SUBTARGET in json files
    Some targets like kirkwood or omap don't use a subtarget which results
    in a malformed JSON info file.
    
    Instead of having a valid value like `"target": "ath79/tiny"` for these
    targets the value is `"target": "kirkwood/"`.
    
    This patch uses the same if condition to use `generic` if the subtarget
    is empty.
    
    Tested for the kirkwood target.
    
    Signed-off-by: Paul Spooren <mail@aparcar.org>

    Changed files

    • include/image.mk
  10. Change #1724

    Category None
    Changed by DENG Qingfang <dengqf6ohnoyoudont@mail2.sysu.edu.cn>
    Changed at Thu 13 Feb 2020 20:35:13
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 5715b21f8066f85aa06ff131868e11a27cca5559

    Comments

    iproute2: update to 5.5.0, enable LTO
    Update iproute2 to 5.5.0
    Enable LTO to save several KB of size
    
    Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

    Changed files

    • package/network/utils/iproute2/Makefile
    • package/network/utils/iproute2/patches/100-configure.patch
    • package/network/utils/iproute2/patches/115-add-config-xtlibdir.patch
    • package/network/utils/iproute2/patches/140-keep_libmnl_optional.patch
    • package/network/utils/iproute2/patches/145-keep_libelf_optional.patch
    • package/network/utils/iproute2/patches/150-keep_libcap_optional.patch
    • package/network/utils/iproute2/patches/175-reduce-dynamic-syms.patch
    • package/network/utils/iproute2/patches/180-drop_FAILED_POLICY.patch
    • package/network/utils/iproute2/patches/200-drop_libbsd_dependency.patch