Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder ath25/generic Build #284

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision016339ba42498affb178edec2609bd5358db9b20
Got Revision016339ba42498affb178edec2609bd5358db9b20
Changes4 changes

BuildSlave:

fsf-dock-15

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. - no logs -
  2. nproc property 'nproc' set ( 0 secs )
    1. - no logs -
  3. dlfindbinpl downloading to findbin.pl ( 0 secs )
    1. - no logs -
  4. gcc property 'cc_command' set ( 0 secs )
    1. - no logs -
  5. g++ property 'cxx_command' set ( 0 secs )
    1. - no logs -
  6. setproperty property 'ccache_command' set ( 0 secs )
    1. - no logs -
  7. dlexpiresh dlexpiresh skipped ( 0 secs )
    1. - no logs -
  8. expire Checking for build tree expiry skipped ( 0 secs )
    1. - no logs -
  9. dlcleanupsh dlcleanupsh skipped ( 0 secs )
    1. - no logs -
  10. cleanold Cleaning previous builds skipped ( 0 secs )
    1. - no logs -
  11. cleanup Cleaning work area skipped ( 0 secs )
    1. - no logs -
  12. tools/clean User-requested "make tools/clean" skipped ( 0 secs )
    1. - no logs -
  13. toolchain/clean User-requested "make toolchain/clean" skipped ( 0 secs )
    1. - no logs -
  14. target/linux/clean User-requested "make target/linux/clean" skipped ( 0 secs )
    1. - no logs -
  15. dirclean User-requested "make dirclean" skipped ( 0 secs )
    1. - no logs -
  16. distclean User-requested "make distclean" skipped ( 0 secs )
    1. - no logs -
  17. gitcheckout Ensure that Git HEAD is sane ( 0 secs )
    1. - no logs -
  18. gitclean update skipped ( 0 secs )
    1. - no logs -
  19. gitfresh update ( 11 secs )
    1. - no logs -
  20. fetchrefs Fetching Git remote refs ( 1 secs )
    1. - no logs -
  21. switchtag Checking out Git tag skipped ( 0 secs )
    1. - no logs -
  22. gitverify Ensure that Git HEAD is pointing to a branch or tag ( 0 secs )
    1. - no logs -
  23. rmtmp Remove tmp folder ( 0 secs )
    1. - no logs -
  24. rmfeedlinks Remove feed symlinks ( 0 secs )
    1. - no logs -
  25. ccachecc downloading to ccache_cc.sh ( 0 secs )
    1. - no logs -
  26. ccachecxx downloading to ccache_cxx.sh ( 0 secs )
    1. - no logs -
  27. updatefeeds Updating feeds ( 2 mins, 8 secs )
    1. - no logs -
  28. installfeeds Installing feeds ( 34 secs )
    1. - no logs -
  29. dlconfigseed downloading to .config ( 0 secs )
    1. - no logs -
  30. newconfig Seeding .config ( 0 secs )
    1. - no logs -
  31. delbin Removing output directory ( 0 secs )
    1. - no logs -
  32. defconfig Populating .config ( 27 secs )
    1. - no logs -
  33. checkarch Checking architecture ( 0 secs )
    1. - no logs -
  34. libc property 'libc' set ( 0 secs )
    1. - no logs -
  35. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  36. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  37. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  38. dldir Preparing dl/ ( 0 secs )
    1. - no logs -
  39. dltar Building and installing GNU tar ( 1 mins, 41 secs )
    1. - no logs -
  40. dlrun Populating dl/ ( 32 secs )
    1. - no logs -
  41. cleanbase Cleaning base-files ( 16 secs )
    1. - no logs -
  42. tools Building and installing tools ( 3 mins, 46 secs )
    1. - no logs -
  43. toolchain Building and installing toolchain ( 10 mins, 31 secs )
    1. - no logs -
  44. kmods Building kmods ( 4 mins, 11 secs )
    1. - no logs -
  45. kernelversion property 'kernelversion' set ( 0 secs )
    1. - no logs -
  46. pkgclean Cleaning up package build ( 15 secs )
    1. - no logs -
  47. pkgbuild Building packages ( 9 mins, 37 secs )
    1. - no logs -
  48. pkginstall Installing packages ( 25 secs )
    1. - no logs -
  49. pkgindex Indexing packages ( 22 secs )
    1. - no logs -
  50. stageroot property 'stageroot' set ( 3 secs )
    1. - no logs -
  51. filesdir Creating file overlay directory ( 0 secs )
    1. - no logs -
  52. kmodconfig Embedding kmod repository configuration ( 0 secs )
    1. - no logs -
  53. images Building and installing images ( 6 mins, 42 secs )
    1. - no logs -
  54. buildinfo Generating config.buildinfo, version.buildinfo and feeds.buildinfo ( 21 secs )
    1. - no logs -
  55. checksums Calculating checksums ( 17 secs )
    1. - no logs -
  56. kmoddir Creating kmod directory ( 0 secs )
    1. - no logs -
  57. kmodprepare Preparing kmod archive ( 0 secs )
    1. - no logs -
  58. kmodindex Indexing kmod archive ( 20 secs )
    1. - no logs -
  59. signprepare Ran ( 0 secs )
    1. - no logs -
  60. signpack Packing files to sign ( 0 secs )
    1. - no logs -
  61. upload uploading sign.tar.gz ( 2 secs )
    1. - no logs -
  62. signfiles Ran ( 2 secs )
    1. - no logs -
  63. dlsigntargz downloading to sign.tar.gz ( 4 secs )
    1. - no logs -
  64. signunpack Unpacking signed files ( 0 secs )
    1. - no logs -
  65. dirprepare Preparing upload directory structure ( 0 secs )
    1. - no logs -
  66. linkprepare Preparing repository symlink skipped ( 0 secs )
    1. - no logs -
  67. kmoddirprepare Preparing kmod archive upload directory ( 0 secs )
    1. - no logs -
  68. dirupload Uploading directory structure ( 2 secs )
    1. - no logs -
  69. target-sha256sums Fetching remote sha256sums for target ( 2 secs )
    1. - no logs -
  70. dlsha2rsyncpl downloading to sha2rsync.pl ( 0 secs )
    1. - no logs -
  71. buildlist Building list of files to upload ( 0 secs )
    1. - no logs -
  72. dlrsync.sh downloading to rsync.sh ( 0 secs )
    1. - no logs -
  73. targetupload Uploading target files ( 8 mins, 58 secs )
    1. - no logs -
  74. targetprune Pruning target files ( 3 secs )
    1. - no logs -
  75. kmodupload Uploading kmod archive ( 44 secs )
    1. - no logs -
  76. sourcelist Finding source archives to upload ( 0 secs )
    1. - no logs -
  77. sourceupload Uploading source archives ( 2 secs )
    1. - no logs -
  78. df Reporting disk usage ( 0 secs )
    1. - no logs -
  79. ccachestat Reporting ccache stats ( 0 secs )
    1. - no logs -

Build Properties:

NameValueSource
branch master Build
builddir /builder/ath25_generic slave
buildername ath25/generic Builder
buildnumber 284 Build
cc_command /usr/bin/gcc-6 SetPropertyFromCommand Step
ccache_command /usr/bin/ccache SetPropertyFromCommand Step
codebase Build
cxx_command /usr/bin/g++-6 SetPropertyFromCommand Step
dl_lock None BuildSlave
do_cleanup True BuildSlave
got_revision 016339ba42498affb178edec2609bd5358db9b20 Git
kernelversion 4.14.167-1-e2542d8e9d075695b6f0b348aeefda55 SetPropertyFromCommand Step
libc SetPropertyFromCommand Step
max_builds 1 BuildSlave
nproc 8 SetPropertyFromCommand Step
project Build
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 016339ba42498affb178edec2609bd5358db9b20 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename fsf-dock-15 BuildSlave
stageroot /builder/shared-workdir/build/staging_dir/target-mips_mips32_musl/root-ath25 SetPropertyFromCommand Step
ul_lock None BuildSlave
workdir /builder/ath25_generic slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Christian Lamparter
  2. Fredrik Olofsson
  3. Yen-Ting-Shen

Timing:

StartSun Jan 26 15:15:14 2020
EndSun Jan 26 16:08:25 2020
Elapsed53 mins, 10 secs

All Changes:

:

  1. Change #1617

    Category None
    Changed by Fredrik Olofsson <fredrik.olofssonohnoyoudont@anyfinetworks.com>
    Changed at Sun 26 Jan 2020 00:20:45
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 52b8c7a8928ccdc80436c76955f237960ea3bf1f

    Comments

    ipq40xx: Add support for D-Link DAP-2610
    Specifications
    ==============
    - SOC: IPQ4018
    - RAM: DDR3 256MB
    - Flash: SPI NOR 16MB
    - WiFi:
        - 2.4GHz: IPQ4018, 2x2, front end SKY85303-11
        - 5GHz: IPQ4018, 2x2, front end SKY85717-21
    - Ethernet: 1x 10/100/1000Mbps, POE 802.3af
    - PHY: QCA8072
    - UART: GND, blocked, 3.3V, RX, TX / 115200 8N1
    - LED: 1x red / green
    - Button: 1x reset / factory default
    - U-Boot bootloader with tftp and "emergency web server" accessible
      using serial port.
    
    Installation
    ============
    Flash factory image from D-Link web UI. Constraints in the D-Link web UI
    makes the factory image unnecessarily large. Flash again using
    sysupgrade from inside OpenWrt to reclaim some flash space.
    
    Return to stock D-Link firmware
    ===============================
    Partition layout is preserved, and it is possible to return to the stock
    firmware simply by downloading it from D-Link and writing it to the
    firmware partition.
    
        # mtd -r write dap2610-firmware.bin firmware
    
    Quirks
    ======
    To be flashable from the D-Link http server, the firmware must be larger
    then 6MB, and the size in the firmware header must match the actual file
    size. Also, the boot loader verifies the checksum of the firmware before
    each boot, thus the jffs2 must be after the checksum covered part. This
    is solved in the factory image by having the rootfs at the very end of
    the image (without pad-rootfs).
    
    The sysupgrade image which does not have to be flashable from the D-Link
    web UI may be smaller, and the checksum in the firmware header only
    covers the kernel part of the image.
    
    Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
    [added WRGG Variables to DEVICE_VARS, squashed spi pinconf/mux,
    added emd1's gmac0 config,fix dtc warnings]
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

    Changed files

    • package/firmware/ipq-wifi/Makefile
    • package/firmware/ipq-wifi/board-dlink_dap2610.qca4019
    • target/linux/ipq40xx/base-files/etc/board.d/02_network
    • target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ipq40xx/config-4.19
    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
    • target/linux/ipq40xx/image/Makefile
    • target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
  2. Change #1618

    Category None
    Changed by Yen-Ting-Shen <frank.shenohnoyoudont@senao.com>
    Changed at Sun 26 Jan 2020 00:20:45
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 51f30359783938a1be7ffbd08e508c1b6c9c449f

    Comments

    ipq40xx: add support for EnGenius EMD1
    SOC:     IPQ4018 / QCA Dakota
    CPU:     Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
    DRAM:    256 MiB
    NOR:     32 MiB
    ETH:     Qualcomm Atheros QCA8072 (1 port)
    WLAN1:   Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
    WLAN2:   Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
    INPUT:   RESET Button
    LEDS:    White, Blue, Red, Orange
    
    Flash instruction:
    
    From EnGenius firmware to OpenWrt firmware:
    
    In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly.
    
    From OpenWrt firmware to EnGenius firmware:
    
    1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
       Put the EnGenius firmware in the TFTP server directory on your computer.
    2. Power up EMD1. Press 4 and then press any key to enter u-boot.
    3. Download EnGenius firmware
       (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img
    4. Flash the firmware
       (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script
    5. Reboot
       (IPQ40xx) # reset
    
    Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com>
    [removed BOARD_NAME]
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

    Changed files

    • package/firmware/ipq-wifi/Makefile
    • package/firmware/ipq-wifi/board-engenius_emd1.qca4019
    • target/linux/ipq40xx/base-files/etc/board.d/02_network
    • target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
    • target/linux/ipq40xx/image/Makefile
    • target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
  3. Change #1619

    Category None
    Changed by Christian Lamparter <chunkeeyohnoyoudont@gmail.com>
    Changed at Sun 26 Jan 2020 00:20:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a59f1ec30f3316c8afffbaae39234cb562973f26

    Comments

    ipq-wifi: drop deprecated .bin support
    This patch converts the Qxwlan E2600AC image away from
    the deprecated .bin file and to the new .qca4019 method.
    
    As a result, we no longer need to carry around the
    legacy support for handling .bin files.
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

    Changed files

    • package/firmware/ipq-wifi/Makefile
    • package/firmware/ipq-wifi/board-qxwlan_e2600ac.bin
    • package/firmware/ipq-wifi/board-qxwlan_e2600ac.qca4019
  4. Change #1620

    Category None
    Changed by Christian Lamparter <chunkeeyohnoyoudont@gmail.com>
    Changed at Sun 26 Jan 2020 00:20:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 016339ba42498affb178edec2609bd5358db9b20

    Comments

    ipq40xx: fix misplaced cells-sizes in WPJ419's dts
    This patch fixes the occurences of the following warning
    message from the dtc:
    
    Warning (reg_format): /soc/spi@78b5000/flash0@0/partitions/partition@0:reg:
    property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
    
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

    Changed files

    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts