Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder ath25/generic Build #642

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision475838de1a33d49d1a0b81aad374a8db6dd2b3c8
Got Revision475838de1a33d49d1a0b81aad374a8db6dd2b3c8
Changes21 changes

BuildSlave:

fsf-dock-16

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. - no logs -
  2. nproc property 'nproc' set ( 0 secs )
    1. - no logs -
  3. dlfindbinpl downloading to findbin.pl ( 0 secs )
    1. - no logs -
  4. gcc property 'cc_command' set ( 0 secs )
    1. - no logs -
  5. g++ property 'cxx_command' set ( 0 secs )
    1. - no logs -
  6. setproperty property 'ccache_command' set ( 0 secs )
    1. - no logs -
  7. dlexpiresh dlexpiresh skipped ( 0 secs )
    1. - no logs -
  8. expire Checking for build tree expiry skipped ( 0 secs )
    1. - no logs -
  9. dlcleanupsh dlcleanupsh skipped ( 0 secs )
    1. - no logs -
  10. cleanold Cleaning previous builds skipped ( 0 secs )
    1. - no logs -
  11. cleanup Cleaning work area skipped ( 0 secs )
    1. - no logs -
  12. tools/clean User-requested "make tools/clean" skipped ( 0 secs )
    1. - no logs -
  13. toolchain/clean User-requested "make toolchain/clean" skipped ( 0 secs )
    1. - no logs -
  14. target/linux/clean User-requested "make target/linux/clean" skipped ( 0 secs )
    1. - no logs -
  15. dirclean User-requested "make dirclean" skipped ( 0 secs )
    1. - no logs -
  16. distclean User-requested "make distclean" skipped ( 0 secs )
    1. - no logs -
  17. gitcheckout Ensure that Git HEAD is sane ( 0 secs )
    1. - no logs -
  18. gitclean update skipped ( 0 secs )
    1. - no logs -
  19. gitfresh update ( 17 secs )
    1. - no logs -
  20. fetchrefs Fetching Git remote refs ( 1 secs )
    1. - no logs -
  21. switchtag Checking out Git tag skipped ( 0 secs )
    1. - no logs -
  22. gitverify Ensure that Git HEAD is pointing to a branch or tag ( 0 secs )
    1. - no logs -
  23. rmtmp Remove tmp folder ( 0 secs )
    1. - no logs -
  24. rmfeedlinks Remove feed symlinks ( 0 secs )
    1. - no logs -
  25. ccachecc downloading to ccache_cc.sh ( 0 secs )
    1. - no logs -
  26. ccachecxx downloading to ccache_cxx.sh ( 0 secs )
    1. - no logs -
  27. updatefeeds Updating feeds ( 1 mins, 41 secs )
    1. - no logs -
  28. installfeeds Installing feeds ( 23 secs )
    1. - no logs -
  29. dlconfigseed downloading to .config ( 0 secs )
    1. - no logs -
  30. newconfig Seeding .config ( 0 secs )
    1. - no logs -
  31. delbin Removing output directory ( 0 secs )
    1. - no logs -
  32. defconfig Populating .config ( 36 secs )
    1. - no logs -
  33. checkarch Checking architecture ( 0 secs )
    1. - no logs -
  34. libc property 'libc' set ( 0 secs )
    1. - no logs -
  35. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  36. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  37. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  38. dldir Preparing dl/ ( 0 secs )
    1. - no logs -
  39. dltar Building and installing GNU tar ( 1 mins, 53 secs )
    1. - no logs -
  40. dlrun Populating dl/ ( 36 secs )
    1. - no logs -
  41. cleanbase Cleaning base-files ( 15 secs )
    1. - no logs -
  42. tools Building and installing tools ( 4 mins, 22 secs )
    1. - no logs -
  43. toolchain Building and installing toolchain ( 10 mins, 52 secs )
    1. - no logs -
  44. kmods Building kmods ( 5 mins, 10 secs )
    1. - no logs -
  45. kernelversion property 'kernelversion' set ( 0 secs )
    1. - no logs -
  46. pkgclean Cleaning up package build ( 16 secs )
    1. - no logs -
  47. pkgbuild Building packages ( 19 mins, 34 secs )
    1. - no logs -
  48. pkginstall Installing packages ( 27 secs )
    1. - no logs -
  49. pkgindex Indexing packages ( 24 secs )
    1. - no logs -
  50. stageroot property 'stageroot' set ( 3 secs )
    1. - no logs -
  51. filesdir Creating file overlay directory ( 0 secs )
    1. - no logs -
  52. kmodconfig Embedding kmod repository configuration ( 0 secs )
    1. - no logs -
  53. images Building and installing images ( 4 mins, 47 secs )
    1. - no logs -
  54. buildinfo Generating config.buildinfo, version.buildinfo and feeds.buildinfo ( 29 secs )
    1. - no logs -
  55. json_overview_image_info Generate profiles.json in target folder ( 14 secs )
    1. - no logs -
  56. checksums Calculating checksums ( 24 secs )
    1. - no logs -
  57. kmoddir Creating kmod directory ( 0 secs )
    1. - no logs -
  58. kmodprepare Preparing kmod archive ( 0 secs )
    1. - no logs -
  59. kmodindex Indexing kmod archive ( 28 secs )
    1. - no logs -
  60. signprepare Ran ( 0 secs )
    1. - no logs -
  61. signpack Packing files to sign ( 0 secs )
    1. - no logs -
  62. upload uploading sign.tar.gz ( 2 secs )
    1. - no logs -
  63. signfiles Ran ( 2 secs )
    1. - no logs -
  64. dlsigntargz downloading to sign.tar.gz ( 3 secs )
    1. - no logs -
  65. signunpack Unpacking signed files ( 0 secs )
    1. - no logs -
  66. dirprepare Preparing upload directory structure ( 0 secs )
    1. - no logs -
  67. linkprepare Preparing repository symlink skipped ( 0 secs )
    1. - no logs -
  68. kmoddirprepare Preparing kmod archive upload directory ( 0 secs )
    1. - no logs -
  69. dirupload Uploading directory structure ( 2 secs )
    1. - no logs -
  70. target-sha256sums Fetching remote sha256sums for target ( 2 secs )
    1. - no logs -
  71. dlsha2rsyncpl downloading to sha2rsync.pl ( 0 secs )
    1. - no logs -
  72. buildlist Building list of files to upload ( 0 secs )
    1. - no logs -
  73. dlrsync.sh downloading to rsync.sh ( 0 secs )
    1. - no logs -
  74. targetupload Uploading target files ( 12 mins, 52 secs )
    1. - no logs -
  75. targetprune Pruning target files ( 3 secs )
    1. - no logs -
  76. kmodupload Uploading kmod archive ( 6 secs )
    1. - no logs -
  77. sourcelist Finding source archives to upload ( 0 secs )
    1. - no logs -
  78. sourceupload Uploading source archives ( 2 secs )
    1. - no logs -
  79. df Reporting disk usage ( 0 secs )
    1. - no logs -
  80. ccachestat Reporting ccache stats ( 0 secs )
    1. - no logs -

Build Properties:

NameValueSource
branch master Build
builddir /builder/ath25_generic slave
buildername ath25/generic Builder
buildnumber 642 Build
cc_command /usr/bin/gcc-6 SetPropertyFromCommand Step
ccache_command /usr/bin/ccache SetPropertyFromCommand Step
codebase Build
cxx_command /usr/bin/g++-6 SetPropertyFromCommand Step
dl_lock None BuildSlave
do_cleanup True BuildSlave
got_revision 475838de1a33d49d1a0b81aad374a8db6dd2b3c8 Git
kernelversion 5.4.67-1-6d5e0eb3a4c647b3417fe2b99d31786b SetPropertyFromCommand Step
libc SetPropertyFromCommand Step
max_builds 1 BuildSlave
nproc 8 SetPropertyFromCommand Step
project Build
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 475838de1a33d49d1a0b81aad374a8db6dd2b3c8 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename fsf-dock-16 BuildSlave
stageroot /builder/shared-workdir/build/staging_dir/target-mips_mips32_musl/root-ath25 SetPropertyFromCommand Step
ul_lock None BuildSlave
workdir /builder/ath25_generic slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Eneas U de Queiroz
  3. Piotr Dymacz

Timing:

StartMon Sep 28 11:03:31 2020
EndMon Sep 28 12:10:30 2020
Elapsed1 hrs, 6 mins, 59 secs

All Changes:

:

  1. Change #4071

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Sun 27 Sep 2020 22:20:24
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 315904a459f5d40c1f20dc390f5101f058e6e6e1

    Comments

    ramips: merge ethernet setup for RT-AC51U/RT-AC54U
    The ethernet setup/label MAC address for RT-AC51U and RT-AC54U are
    the same, so move them into the shared DTSI.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ramips/dts/mt7620a_asus_rt-ac51u.dts
    • target/linux/ramips/dts/mt7620a_asus_rt-ac54u.dts
    • target/linux/ramips/dts/mt7620a_asus_rt-ac5x.dtsi
  2. Change #4072

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 1cab34dbaedf9793b088900b53de9a06e85cfa0a

    Comments

    target.mk: enable iwinfo by default with any wpad variant
    There are currently several variants of 'wpad' package but the 'iwinfo'
    is included by default only if 'wpad', 'wpad-{basic*,mini}' or 'nas'
    packages are included in {DEVICE,DEFAULT}_PACKAGES. Use 'wpad-*'
    pattern to include 'iwinfo' with any 'wpad' variant.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • include/target.mk
  3. Change #4073

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision b329bb94566700316588fb0d5b174f64c4461201

    Comments

    ath79: increase SPI clock and enable fast-read on AP121F
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
  4. Change #4074

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 7f96cbd2a11a382a940ecdfc75d45bad44283414

    Comments

    ath79: enable usbgadget feature
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/Makefile
  5. Change #4075

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 66abd58196a8e1195f1e2cd9871b4fc194b6570b

    Comments

    ath79: add support for ALFA Network AP121FE
    The AP121FE is a slightly modified version of already supported AP121F
    model (added to ar71xx in 0c6165d21a and to ath79 in 334bbc5198).
    
    The differences in compare to AP121F:
    
    - no micro SD card reader
    - USB data lines are included in Type-A plug
    - USB bus switched to device/peripheral mode (permanently, in bootstrap)
    
    Other than that, specifications are the same:
    
    - Atheros AR9331
    - 400/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR1)
    - 16 MB of flash (SPI NOR)
    - 1x 10/100 Mbps Ethernet
    - 1T1R 2.4 GHz Wi-Fi, up to 15 dBm
    - 1x IPEX/U.FL connector, internal PCB antenna
    - 3x LED, 1x button, 1x switch
    - 4-pin UART header on PCB (2 mm pitch)
    - USB 2.0 Type-A plug (power and data)
    
    Flash instruction (under U-Boot web recovery mode):
    
    1. Configure PC with static IP 192.168.1.2/24.
    2. Connect PC with RJ45 port, press the reset button, power up device,
       wait for first blink of all LEDs (indicates network setup), then keep
       button for 3 following blinks and release it.
    3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
    • target/linux/ath79/dts/ar9331_alfa-network_ap121f.dtsi
    • target/linux/ath79/dts/ar9331_alfa-network_ap121fe.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  6. Change #4076

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 77598f19cc08a421f927979b3e85f7f18b8f9648

    Comments

    uboot-envtools: ath79: add support for ALFA Network AP121FE
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  7. Change #4077

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c65c306d336418f3b6519693d892148f6e2eb38e

    Comments

    ath79: add support for Wallys DR531
    Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Support for this
    device was first introduced in e767980eb8 (ar71xx target).
    
    Specifications:
    
    - Qualcomm/Atheros QCA9531 v2
    - 550/400/200 MHz (CPU/DDR/AHB)
    - 2x 10/100 Mbps Ethernet
    - 64 MB of RAM (DDR2)
    - 8 MB of flash (SPI NOR)
    - 2T2R 2.4 GHz Wi-Fi, with external PA (SE2576L), up to 30 dBm
    - 2x MMCX connectors (optional IPEX/U.FL)
    - mini PCIe connector (PCIe/USB buses and mini SIM slot)
    - 7x LED, 1x button, 1x optional buzzer
    - UART, JTAG and LED headers on PCB
    
    Flash instruction (do it under U-Boot, using UART):
    
      tftpb 0x80060000 openwrt-ath79-...-dr531-squashfs-sysupgrade.bin
      erase 0x9f050000 +$filesize
      cp.b $fileaddr 0x9f050000 $filesize
      setenv bootcmd "bootm 0x9f050000"
      saveenv && reset
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/qca9531_wallys_dr531.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/image/generic.mk
  8. Change #4078

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9b699301f5bda1e03388a51e9892ff7f5e2a44a9

    Comments

    uboot-envtools: ath79: add support for Wallys DR531
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  9. Change #4079

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f777bca95d9f26ede4920323cd823315c648bca5

    Comments

    ath79: image: don't combine kmod-usb2 with kmod-usb-chipidea2
    Include of kmod-usb-chipidea2 is enough to support USB host mode in
    devices with Atheros AR9331 WiSOC.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/image/generic.mk
  10. Change #4080

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision cf42660dcedf5b994eb9aa5f508ec9a7c301fddc

    Comments

    ath79: add support for Samsung WAM250
    Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless
    hub, dedicated for Samsung Shape Wireless Audio System. The device is
    based on Atheros AR9344 (FCC ID: A3LWAM250). Support for this device
    was first introduced in e58e49bdbe (ar71xx target).
    
    Specifications:
    
    - Atheros AR9344
    - 560/450/225 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 2x 10/100 Mbps Ethernet
    - 2T2R 2.4/5 GHz Wi-Fi, with ext. PA (SE2598L, SE5003L) and LNA
    - 1x USB 2.0
    - 4x LED (all are driven by GPIO)
    - 2x button (reset, wps/speaker add)
    - DC jack for main power input (14 V)
    - UART header on PCB (J4, RX: 3, TX: 5)
    
    Flash instruction:
    
    This device uses dual-image (switched between upgrades) with a common
    jffs2 config partition. Fortunately, there is a way to disable this mode
    so that more flash space can be used by OpenWrt image.
    
    You can easily access this device over telnet, using root/root
    credentials (the same also work for serial console access).
    
    1. Make sure that your device uses second (bootpart=2) image using
       command: "fw_printenv bootpart".
    2. If your device uses first image (bootpart=1), perform upgrade to the
       latest vendor firmware (after the update, device should boot from
       second partition) using web gui (default login: admin/1234567890).
    3. Rename "sysupgrade" image to "firmware.bin", download it (you can use
       wget, tftp or ftpget) to "/tmp" and issue below commands:
    
       mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}')
       mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin)
       fw_setenv bootpart
       fw_setenv bootcmd "bootm 0x9f070000"
       reboot
    
    Revert to vendor firmware instruction:
    
    1. Download vendor firmware to "/tmp" device and issue below commands:
    
       fw_setenv bootpart 1
       sysupgrade -n -F SS_BHUB_v2.2.05.bin
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9344_samsung_wam250.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/image/generic.mk
  11. Change #4081

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c40b693bd8ea9f4752148895286ea2fd0f60b7f6

    Comments

    uboot-envtools: ath79: add support for Samsung WAM250
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  12. Change #4082

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9bcf98ed85fc5f9eca6e7f10cce8d6bf1b23914d

    Comments

    ath79: add support for ALFA Network R36A
    ALFA Network R36A is a successor of the previous model, the R36 (Ralink
    RT3050F based). New version is based on Qualcomm/Atheros QCA9531 v2, FCC
    ID: 2AB879531.
    
    Support for this device was first introduced in af8f0629df (ar71xx
    target). When updating from previous release (and/or ar71xx target),
    user should only adjust the WAN LED trigger type (netdev in ar71xx,
    switch port in ath79).
    
    Specifications:
    
    - Qualcomm/Atheros QCA9531 v2
    - 650/400/200 MHz (CPU/DDR/AHB)
    - 128 MB (R36AH/-U2) or 64 MB (R36A) of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 2x 10/100 Mbps Ethernet
    - Passive PoE input support (12~36 V) in RJ45 near DC jack
    - 2T2R 2.4 GHz Wi-Fi with Qorvo RFFM8228P FEM
    - 2x IPEX/U.FL connectors on PCB
    - 1x USB 2.0 Type-A
    - 1x USB 2.0 mini Type-B in R36AH-U2 version
    - USB power is controlled by GPIO
    - 6/7x LED (5/6 of them are driven by GPIO)
    - 2x button (reset, wifi/wps)
    - external h/w watchdog (EM6324QYSP5B, enabled by default)
    - DC jack with lock, for main power input (12 V)
    - UART (4-pin, 2.54 mm pitch) header on PCB
    
    Optional/additional features in R36A series (R36A was the first model):
    - for R36AH:    USB 2.0 hub*
    - for R36AH-U2: USB 2.0 hub*, 1x USB 2.0 mini Type-B, one more LED
    
    *) there are at least three different USB 2.0 hub in R36AH/-U2 variants:
    - Terminus-Tech FE 1.1
    - Genesys Logic GL852G
    - Genesys Logic GL850G (used in latests revision)
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
    
    1. Configure PC with static IP 192.168.1.2/24.
    2. Connect PC with one of RJ45 ports, press the reset button, power up
       device, wait for first blink of all LEDs (indicates network setup),
       then keep button for 3 following blinks and release it.
    3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  13. Change #4083

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9181b039f3d8df3edb9feff074840b69b504099d

    Comments

    uboot-envtools: ath79: add support for ALFA Network R36A
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  14. Change #4084

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 6492ea7d9e4f2a392e8576b5fdaa76815d3c6350

    Comments

    ath79: add support for ALFA Network N2Q
    ALFA Network N2Q is an outdoor N300 AP/CPE based on Qualcomm/Atheros
    QCA9531 v2. This model is a successor of the old N2 which was based
    on Atheros AR7240. FCC ID: 2AB8795311.
    
    Specifications:
    
    - Qualcomm/Atheros QCA9531 v2
    - 650/400/200 MHz (CPU/DDR/AHB)
    - 128 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 2T2R 2.4 GHz Wi-Fi with ext. PA (Skyworks SE2623L) and LNA
    - 2x 10/100 Mbps Ethernet with passive PoE input in one port (24 V)
    - PoE pass through in second port (controlled by GPIO)
    - support for optional 802.3af/at PoE module
    - 1x mini PCIe slot (PCIe bus, extra 4.2 V for high power cards)
    - 2x IPEX/U.FL connectors on PCB
    - 1x USB 2.0 mini Type-B (power controlled by GPIO)
    - 8x LED (7 of them are driven by GPIO)
    - 1x button (reset)
    - external h/w watchdog (EM6324QYSP5B, enabled by default)
    - UART (4-pin, 2.54 mm pitch) header on PCB
    - LEDs (2x 5-pin, 2.54 mm pitch) header on PCB
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
    
    1. Configure PC with static IP 192.168.1.2/24.
    2. Connect PC with one of RJ45 ports, press the reset button, power up
       device, wait for first blink of all LEDs (indicates network setup),
       then keep button for 3 following blinks and release it.
    3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/qca9531_alfa-network_n2q.dts
    • target/linux/ath79/dts/qca9531_alfa-network_r36a.dts
    • target/linux/ath79/dts/qca9531_alfa-network_r36a.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  15. Change #4085

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 6ae0684297eb83cb3fa4a70af91a2433b60b981d

    Comments

    uboot-envtools: ath79: add support for ALFA Network N2Q
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  16. Change #4086

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 70a57d48dbd2b6653d6bfd5d8c4827a706cf42b9

    Comments

    ath79: add support for ALFA Network N5Q
    ALFA Network N5Q is a successor of previous model, the N5 (outdoor
    CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
    Atheros AR9344.
    
    Support for this device was first introduced in 4b0eebe9df (ar71xx
    target) but users are advised to migrate from ar71xx target without
    preserving settings as ath79 support includes some changes in network
    and LED default configuration. They were aligned with vendor firmware
    and recently added N2Q model (both Ethernet ports as LAN, labelled as
    LAN1 and LAN2).
    
    Specifications:
    
    - Atheros AR9344
    - 550/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
    - 2T2R 5 GHz Wi-Fi, with ext. PA (RFPA5542) and LNA, up to 27 dBm
    - 2x IPEX/U.FL or MMCX antenna connectors (for PCBA version)
    - 8x LED (7 are driven by GPIO)
    - 1x button (reset)
    - external h/w watchdog (EM6324QYSP5B, enabled by default)
    - header for optional 802.3at/af PoE module
    - DC jack for main power input (optional, not installed by default)
    - UART (4-pin, 2.54 mm pitch) header on PCB
    - LEDs (2x 5-pin, 2.54 mm pitch) header on PCB
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:
    
    1. Configure PC with static IP 192.168.1.2/24.
    2. Connect PC with one of RJ45 ports, press the reset button, power up
       device, wait for first blink of all LEDs (indicates network setup),
       then keep button for 3 following blinks and release it.
    3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9344_alfa-network_n5q.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  17. Change #4087

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision b4e9e81002763127cad633d2886678b6137a8768

    Comments

    uboot-envtools: ath79: add support for ALFA Network N5Q
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • package/boot/uboot-envtools/files/ath79
  18. Change #4088

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a2f3a586073a0d3bc3a3e16fcd67ca099cf00eab

    Comments

    ath79: add support for Hak5 LAN Turtle
    Hak5 LAN Turtle is an "USB Ethernet Adapter" shaped device dedicated for
    sysadmins and pentesters. This device is based on Atheros AR9331 but it
    lacks WiFi. Support for it was first introduced in 950b278c81 (ar71xx).
    
    Two different versions of this device exist and it's up to the user to
    install required drivers (generic image supports only common features):
    
    - LAN Turtle 3G with Quectel UG96 3G modem
    - LAN Turtle SD with microSD card reader (Alcorlink AU6435R)
    
    Specifications:
    
    - Atheros AR9331
    - 400/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 1x RJ45 10/100 Mbps Ethernet (AR9331)
    - 1x USB 2.0 to 10/100 Ethernet bridge (Realtek RTL8152B)
    - 2x LED (power, system), 1x button (inside, on the PCB)
    - USB 2.0 Type-A plug for power and RTL8152B
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on OpenWrt/LEDE.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  19. Change #4089

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision b33ce8c5355eec61663ce0ac789118f82041045f

    Comments

    ath79: add support for Hak5 Packet Squirrel
    Hak5 Packet Squirrel is a pocket-sized device dedicated for pentesters
    (MITM attacks). This device is based on Atheros AR9331 but it lacks
    WiFi. Support for it was first introduced in 950b278c81 (ar71xx).
    
    Specifications:
    
    - Atheros AR9331
    - 400/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR2)
    - 16 MB of flash (SPI NOR)
    - 2x RJ45 10/100 Mbps Ethernet (AR9331)
    - 1x USB 2.0
    - 1x RGB LED, 1x button, 1x 4-way mechanical switch
    - 1x Micro USB Type-B for main power input
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on OpenWrt/LEDE.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts
    • target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
    • target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  20. Change #4090

    Category None
    Changed by Piotr Dymacz <pepe2kohnoyoudont@gmail.com>
    Changed at Sun 27 Sep 2020 23:28:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision e9263123f9f65814b8858efb5b79d58fe05ca732

    Comments

    ath79: add support for Hak5 WiFi Pineapple NANO
    Hak5 WiFi Pineapple NANO is an "USB dongle" device dedicated for Wi-Fi
    pentesters. This device is based on Atheros AR9331 and AR9271. Support
    for it was first introduced in 950b278c81 (ar71xx). FCC ID: 2AB87-NANO.
    
    Specifications:
    
    - Atheros AR9331
    - 400/400/200 MHz (CPU/DDR/AHB)
    - 64 MB of RAM (DDR1)
    - 16 MB of flash (SPI NOR)
    - 1T1R 2.4 GHz Wi-Fi (AR9331)
    - 1T1R 2.4 GHz Wi-Fi (AR9271L), with ext. PA and LNA (Qorvo RFFM4203)
    - 2x RP-SMA antenna connectors
    - 1x USB 2.0 to 10/100 Ethernet bridge (ASIX AX88772A)
    - integrated 4-port USB 2.0 HUB: Alcor Micro AU6259:
      - 1x USB 2.0
      - 1x microSD card reader (Genesys Logic GL834L)
      - Atheros AR9271L
    - 1x LED, 1x button
    - UART (4-pin, 2 mm pitch) header on PCB
    - USB 2.0 Type-A plug for power and AX88772A
    
    Flash instruction:
    
    You can use sysupgrade image directly in vendor firmware which is based
    on OpenWrt/LEDE.
    
    Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_hak5_wifi-pineapple-nano.dts
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  21. Change #4091

    Category None
    Changed by Eneas U de Queiroz <cotequeirozohnoyoudont@gmail.com>
    Changed at Mon 28 Sep 2020 06:49:39
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 475838de1a33d49d1a0b81aad374a8db6dd2b3c8

    Comments

    openssl: bump to 1.1.1h
    This is a bug-fix release.  Patches were refreshed.
    
    Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>

    Changed files

    • package/libs/openssl/Makefile
    • package/libs/openssl/patches/100-Configure-afalg-support.patch
    • package/libs/openssl/patches/130-dont-build-tests-fuzz.patch