Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder arc_archs Build #354

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision947bfc62d003ea54c13470ee6bbc9f20827592b0
Changes10 changes

BuildSlave:

truecz-dock-02

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. download downloading to cleanup.sh ( 0 secs )
    1. - no logs -
  4. cleanold Cleaning previous builds ( 50 secs )
    1. stdio
  5. cleanup Cleaning work area ( 0 secs )
    1. stdio
  6. mksdkdir Preparing SDK directory ( 0 secs )
    1. stdio
  7. downloadsdk Downloading SDK archive ( 3 secs )
    1. stdio
  8. unpacksdk Unpacking SDK archive ( 6 secs )
    1. stdio
  9. updatesdk Updating SDK ( 5 secs )
    1. stdio
  10. cleancmdlinks Sanitizing host command symlinks ( 0 secs )
    1. stdio
  11. writeversionmk downloading to getversion.mk ( 0 secs )
    1. - no logs -
  12. getversion property 'release_version' set ( 0 secs )
    1. stdio
    2. property changes
  13. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  14. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  15. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  16. mkdldir Preparing download directory ( 0 secs )
    1. stdio
  17. mkconf Preparing SDK configuration ( 3 secs )
    1. stdio
  18. download_1 downloading to ccache.sh ( 0 secs )
    1. - no logs -
  19. prepccache Preparing ccache ( 0 secs )
    1. stdio
  20. updatefeeds Updating feeds ( 42 secs )
    1. stdio
  21. installfeeds Installing feeds ( 5 secs )
    1. stdio
  22. logclear Clearing failure logs ( 0 secs )
    1. stdio
  23. compile Building packages ( 3 hrs, 10 mins, 30 secs )
    1. stdio
  24. mkfeedsconf Generating pinned feeds.conf ( 0 secs )
    1. stdio
  25. signprepare Ran ( 0 secs )
    1. stdio
  26. signpack Packing files to sign ( 0 secs )
    1. stdio
  27. upload uploading sign.tar.gz ( 0 secs )
    1. - no logs -
  28. signfiles Ran ( 2 secs )
    1. stdio
  29. download_2 downloading to sign.tar.gz ( 0 secs )
    1. - no logs -
  30. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  31. uploadprepare Preparing package directory ( 0 secs )
    1. stdio
  32. packageupload Uploading package files ( 19 secs )
    1. stdio
  33. logprepare Preparing log directory ( 0 secs )
    1. stdio
  34. logfind Finding failure logs ( 0 secs )
    1. stdio
  35. logcollect Collecting failure logs ( 0 secs )
    1. stdio
  36. logupload Uploading failure logs ( 1 secs )
    1. stdio
  37. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  38. sourceupload Uploading source archives ( 0 secs )
    1. stdio
  39. df Reporting disk usage ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/arc_archs slave
buildername arc_archs Builder
buildnumber 354 Build
codebase Build
nproc 8 SetPropertyFromCommand Step
project Build
release_version SNAPSHOT SetPropertyFromCommand Step
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 947bfc62d003ea54c13470ee6bbc9f20827592b0 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename truecz-dock-02 BuildSlave
workdir /builder/arc_archs slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Rafał Miłecki

Timing:

StartWed Sep 16 16:04:03 2020
EndWed Sep 16 19:16:59 2020
Elapsed3 hrs, 12 mins, 55 secs

All Changes:

:

  1. Change #12927

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Tue 15 Sep 2020 10:28:43
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d5c4750a712797cc039ceec8986e875aa679a864

    Comments

    rtl838x: remove and add some empty lines
    Do some minor empty lines cleanup, i.e. remove those at EOF and
    add some for cosmetic reasons/consistency.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/rtl838x/files-5.4/arch/mips/rtl838x/prom.c
    • target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c
    • target/linux/rtl838x/files-5.4/arch/mips/rtl838x/setup.c
    • target/linux/rtl838x/files-5.4/drivers/gpio/gpio-rtl838x.c
    • target/linux/rtl838x/profiles/00-default.mk
  2. Change #12928

    Category None
    Changed by Rafał Miłecki <rafalohnoyoudont@milecki.pl>
    Changed at Tue 15 Sep 2020 11:45:33
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4a3230683ba12e4cd688304c551d40398b1e7ad3

    Comments

    uhttpd: update to the latest master
    1172357 ubus: add new RESTful API
    fe1888f ubus: fix blob_buf initialization
    
    Fixes: 3d167ed805a9 ("uhttpd: update to the latest master")
    Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

    Changed files

    • package/network/services/uhttpd/Makefile
  3. Change #12938

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 14:31:28
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 0da0aab6f2edc59e00c3c50a3c8f8d7e6f27c0b1

    Comments

    rtl838x: remove some debug output in rtl838x-nor.c
    Seems like leftovers from development, remove them.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/rtl838x/files-5.4/drivers/mtd/spi-nor/rtl838x-nor.c
  4. Change #12939

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 14:31:28
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 5c0cecb6c6bef941b803c7494b087ac08c473f87

    Comments

    rtl838x: refresh config
    Use "make kernel_oldconfig" to update and sort target config.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/rtl838x/config-5.4
  5. Change #12940

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 14:31:28
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 300173950da07e43b56d819114c1d1271ea213cc

    Comments

    rtl838x: fix incorrect assignment from kstrtoul in serial.c
    Assign return value of kstrtoul to error variable instead of
    conversion value.
    
    Suggested-by: Birger Koblitz <git@birger-koblitz.de>
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/rtl838x/files-5.4/arch/mips/rtl838x/serial.c
  6. Change #12942

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 15:28:20
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision cb9bb908de1772d52bec73e6efffb0b803c8e41e

    Comments

    base-files: drop default setup for vconfig
    vconfig has been disabled by default since 2015 [1] and there are
    no remaining uses in entire OpenWrt trunk. However, we still set up
    a specific name_type for it during boot.
    
    While this setup is properly implemented to be only triggered when
    vconfig is present, it still seems anachronistic and unnecessary
    to set up a standard for a tool that is not used anymore.
    
    Therefore, this removes the set_name_type initialization and leaves
    it for those people actually using the tool to configure it as needed.
    
    [1] 899a23227e55 ("busybox: improve applets & deprecate ifconfig, route")
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • package/base-files/Makefile
    • package/base-files/files/etc/init.d/boot
  7. Change #12943

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 15:28:48
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a99614a44f205f48db4278988566d2b6b2b96295

    Comments

    ath79: consistently use "info" label for default-mac partition
    The tp-link safeloader devices typically contain a partition
    "default-mac" which stores the MAC addresses. It is followed by other
    partitions containing device info, like
    
      {"default-mac", 0x610000, 0x00020},
      {"pin", 0x610100, 0x00020},
      {"product-info", 0x611100, 0x01000},
    
    In DTS, we typically assign a 0x10000 sized partition for these,
    which is mostly labelled "mac" or "info". In rarer cases, the
    partitions have been enclosed in a larger "tplink" or "config"
    partition.
    
    However, when comparing different devices, the implementation appears
    relatively arbitrary at the moment.
    Thus, this PR aims at harmonizing these partitions by always using
    the name "info" for the DTS partition containing "default-mac".
    "info" is preferred over "mac" as we never just have "default-mac"
    alone, but always some other device-info partitions as well.
    
    While at it, this also establishes a similar partitioning for the
    few devices where the "info" partitions are part of a bigger
    unspecific "config" partition or similar.
    
    Besides the harmonization itself, this also allows to merge a few
    cases in 11-ath10k-caldata.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
    • target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
    • target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts
    • target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
    • target/linux/ath79/dts/qca9561_tplink_archer-c60-v1.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c60-v2.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c60-v3.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c6x.dtsi
    • target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
    • target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-eu.dts
    • target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2-int.dts
    • target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
  8. Change #12944

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 15:31:03
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c68105c3b4f616931444174ff6d893c8fbaf9465

    Comments

    ath79: use common device definition for Buffalo devices
    The Buffalo devices in ath79 share their image generation code,
    so let's create a shared Device definition for them.
    
    Since most of them use BUFFALO_HWVER := 3, this is moved as
    default to the shared definition as well.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/image/common-buffalo.mk
    • target/linux/ath79/image/generic.mk
    • target/linux/ath79/image/tiny.mk
  9. Change #12945

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 15:32:12
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 25f2f66eeaf720e3db154019fe0b32a146c6082f

    Comments

    ath79: add support for Buffalo WZR-600DHP
    The hardware of this device seems to be identical to WZR-HP-AG300H.
    It was already implemented as a clone in ar71xx.
    
    Specification:
    - 680 MHz CPU (Qualcomm Atheros AR7161)
    - 128 MiB RAM
    - 32 MiB Flash
    - WiFi 5 GHz a/n
    - WiFi 2.4 GHz b/g/n
    - 5x 1000Base-T Ethernet
    - 1x USB 2.0
    
    Installation of OpenWRT from vendor firmware:
    - Connect to the Web-interface at http://192.168.11.1
    - Go to “Administration” → “Firmware Upgrade”
    - Upload the OpenWrt factory image
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar7161_buffalo_wzr-600dhp.dts
    • target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dts
    • target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
    • target/linux/ath79/image/generic.mk
  10. Change #12946

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 16 Sep 2020 15:34:35
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 947bfc62d003ea54c13470ee6bbc9f20827592b0

    Comments

    ath79: fix button types for WZR-HP-AG300H and WZR-600DHP
    Router and Movie "keys" are actually switches for both devices
    according to the manual. This has been properly implemented in ar71xx,
    but overlooked when porting to ath79.
    
    Fixes: 480bf2827392 ("ath79: add support for Buffalo WZR-HP-AG300H")
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar7161_buffalo_wzr-hp-ag300h.dtsi