Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder arm_cortex-a5_vfpv4 Build #409

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision4ff7bdfeebd4c974b74df74f779fc10891898f5d
Changes10 changes

BuildSlave:

pielstick

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. download downloading to cleanup.sh ( 0 secs )
    1. - no logs -
  4. cleanold Cleaning previous builds ( 1 mins, 2 secs )
    1. stdio
  5. cleanup Cleaning work area ( 0 secs )
    1. stdio
  6. mksdkdir Preparing SDK directory ( 0 secs )
    1. stdio
  7. downloadsdk Downloading SDK archive ( 5 secs )
    1. stdio
  8. unpacksdk Unpacking SDK archive ( 8 secs )
    1. stdio
  9. updatesdk Updating SDK ( 3 secs )
    1. stdio
  10. cleancmdlinks Sanitizing host command symlinks ( 0 secs )
    1. stdio
  11. writeversionmk downloading to getversion.mk ( 0 secs )
    1. - no logs -
  12. getversion property 'release_version' set ( 0 secs )
    1. stdio
    2. property changes
  13. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  14. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  15. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  16. mkdldir Preparing download directory ( 0 secs )
    1. stdio
  17. mkconf Preparing SDK configuration ( 8 secs )
    1. stdio
  18. download_1 downloading to ccache.sh ( 0 secs )
    1. - no logs -
  19. prepccache Preparing ccache ( 0 secs )
    1. stdio
  20. updatefeeds Updating feeds ( 1 mins, 5 secs )
    1. stdio
  21. installfeeds Installing feeds ( 11 secs )
    1. stdio
  22. logclear Clearing failure logs ( 0 secs )
    1. stdio
  23. compile Building packages ( 5 hrs, 4 mins, 19 secs )
    1. stdio
  24. mkfeedsconf Generating pinned feeds.conf ( 0 secs )
    1. stdio
  25. signprepare Ran ( 0 secs )
    1. stdio
  26. signpack Packing files to sign ( 0 secs )
    1. stdio
  27. upload uploading sign.tar.gz ( 1 secs )
    1. - no logs -
  28. signfiles Ran ( 2 secs )
    1. stdio
  29. download_2 downloading to sign.tar.gz ( 1 secs )
    1. - no logs -
  30. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  31. uploadprepare Preparing package directory ( 1 secs )
    1. stdio
  32. packageupload Uploading package files ( 3 mins, 36 secs )
    1. stdio
  33. logprepare Preparing log directory ( 0 secs )
    1. stdio
  34. logfind Finding failure logs ( 0 secs )
    1. stdio
  35. logcollect Collecting failure logs ( 0 secs )
    1. stdio
  36. logupload Uploading failure logs ( 1 secs )
    1. stdio
  37. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  38. sourceupload Uploading source archives ( 0 secs )
    1. stdio
  39. df Reporting disk usage ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /var/lib/buildbot/slaves/pielstick/arm_cortex-a5_vfpv4 slave
buildername arm_cortex-a5_vfpv4 Builder
buildnumber 409 Build
codebase Build
nproc 8 SetPropertyFromCommand Step
project Build
release_version SNAPSHOT SetPropertyFromCommand Step
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 4ff7bdfeebd4c974b74df74f779fc10891898f5d Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename pielstick BuildSlave
workdir /var/lib/buildbot/slaves/pielstick/arm_cortex-a5_vfpv4 slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Felix Fietkau
  3. 张鹏

Timing:

StartSun Oct 18 03:29:22 2020
EndSun Oct 18 08:40:16 2020
Elapsed5 hrs, 10 mins, 54 secs

All Changes:

:

  1. Change #13742

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Fri 16 Oct 2020 19:37:39
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision b59d5c8f0eebb6d15d7cefe487c17fad0ee4a524

    Comments

    mediatek: rewrite flow offload code
    The code is now much cleaner and works better than the old code.
    Preparation for submitting it upstream (though with a different API)
    Also add back MT7621 support and fix flow table coherence issues on
    MT7622
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • target/linux/generic/pending-5.4/770-13-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch
    • target/linux/generic/pending-5.4/770-14-net-ethernet-mtk_eth_soc-set-PPE-flow-hash-as-skb-ha.patch
    • target/linux/generic/pending-5.4/770-15-net-ethernet-mediatek-mtk_eth_soc-add-support-for-in.patch
    • target/linux/generic/pending-5.4/770-16-net-ethernet-mediatek-mtk_eth_soc-add-flow-offloadin.patch
    • target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch
    • target/linux/mediatek/patches-5.4/0999-hnat.patch
    • target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
    • target/linux/ramips/patches-5.4/401-net-ethernet-mediatek-support-net-labels.patch
  2. Change #13743

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Fri 16 Oct 2020 19:39:09
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision ef7c34c1d1beac6bca4a683a3a161dd12a81f7e8

    Comments

    build: process variable exports from toplevel.mk only once
    These run a lot of expensive shell calls, so redundant calls should be
    avoided
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • include/toplevel.mk
  3. Change #13744

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Fri 16 Oct 2020 19:39:10
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 14bad2001f3f205af6d029ee8b55a0f6c4f0f4d0

    Comments

    build: prevent excessive re-evaluation of PKG_VERSION
    version_abbrev uses $(shell) and the ?= is causing make to run the command
    over and over again, causing a significant build slowdown
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • include/download.mk
  4. Change #13747

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Fri 16 Oct 2020 20:58:44
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision e17529a3e3261dbc83c31d27f939a91b065ebe36

    Comments

    Revert "build: process variable exports from toplevel.mk only once"
    This reverts commit ef7c34c1d1beac6bca4a683a3a161dd12a81f7e8.
    
    The commit seems to break all buildbots with messages like:
    
    /builder/shared-workdir/build/include/toplevel.mk:15:
      /builder/shared-workdir/build/include/toplevel-vars.mk: No such file or directory
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • include/toplevel.mk
  5. Change #13762

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 08a42ef057b0c1c31d66358f29376b939487c732

    Comments

    mac80211: fix memory leak on filtered powersave frames
    After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged
    packets for stations in powersave mode.
    To fix this, move the code handling those packets from __ieee80211_tx_status
    into ieee80211_tx_status_ext
    
    Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com>
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • package/kernel/mac80211/patches/subsys/333-mac80211-fix-memory-leak-on-filtered-powersave-frame.patch
  6. Change #13763

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 93f98b283553af9f354b396bc8bb91ca791cc566

    Comments

    kernel: remove obsolete non-upstream block2mtd patches
    Since block2mtd is not used for firmware images anymore, these patches
    are no longer needed
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • target/linux/generic/pending-4.19/440-block2mtd_init.patch
    • target/linux/generic/pending-4.19/441-block2mtd_probe.patch
    • target/linux/generic/pending-5.4/440-block2mtd_init.patch
    • target/linux/generic/pending-5.4/441-block2mtd_probe.patch
  7. Change #13764

    Category None
    Changed by Felix Fietkau <nbdohnoyoudont@nbd.name>
    Changed at Sat 17 Oct 2020 14:43:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4a0688ed71532a3dd68907f5603177d970e4ec03

    Comments

    base-files: remove block2mtd checks from sysupgrade
    This hasn't been used in a long time
    
    Signed-off-by: Felix Fietkau <nbd@nbd.name>

    Changed files

    • package/base-files/files/lib/upgrade/common.sh
    • target/linux/octeon/base-files/lib/upgrade/platform.sh
  8. Change #13768

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:17:59
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 27a7d071c0e0576eddeb641d1f68abe1b6205aee

    Comments

    ath79: add support for Qxwlan E750G v8
    Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334.
    
    Specification:
    
     - 560/450/225 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 2T2R 2.4G GHz (AR9344)
     - 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
     - 7x LED (6 driven by GPIO)
     - 1x button (reset)
     - 1x DC jack for main power input (9-48 V)
     - UART (J23) and LEDs (J2) headers on PCB
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-16m.dts
    • target/linux/ath79/dts/ar9344_qxwlan_e750g-v8-8m.dts
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  9. Change #13769

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:17:59
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 987d9028e12f37fcb3ca095efd6ffde6d7007469

    Comments

    ath79: add support for Qxwlan E558 v2
    Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
    
    Specification:
    
     - 720/600/200 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 2T2R 2.4 GHz (QCA9558)
     - 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
     - 4x miniPCIe slot (USB 2.0 bus only)
     - 1x microSIM slot
     - 5x LED (4 driven by GPIO)
     - 1x button (reset)
     - 1x 3-pos switch
     - 1x DC jack for main power input (9-48 V)
     - UART (JP5) and LEDs (J8) headers on PCB
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig, whitespace adjustments]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts
    • target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts
    • target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  10. Change #13770

    Category None
    Changed by 张鹏 <sd20ohnoyoudont@qxwlan.com>
    Changed at Sat 17 Oct 2020 18:18:00
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4ff7bdfeebd4c974b74df74f779fc10891898f5d

    Comments

    ath79: add support for Qxwlan E1700AC v2
    E1700AC v2 based on Qualcomm/Atheros QCA9563 + QCA9880.
    
    Specification:
    
     - 750/400/250 MHz (CPU/DDR/AHB)
     - 128 MB of RAM (DDR2)
     - 8/16 MB of FLASH (SPI NOR)
     - 3T3R 2.4 GHz
     - 3T3R 5 GHz
     - 2 x 10/1000M Mbps Ethernet (RJ45)
     - 1 x MiniPCI-e
     - 1 x SIM (3G/4G)
     - 1 x USB 2.0 Port
     - 5 x LED , 2 x Button(S8-Reset Buttun), 1 x power input
     - UART (J5) header on PCB (115200 8N1)
    
    Flash instruction:
    
       1.Using tftp mode with UART connection and original LEDE image
          - Configure PC with static IP 192.168.1.10 and tftp server.
          - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
            to "firmware.bin" and place it in tftp server directory.
          - Connect PC with one of LAN ports, power up the router and press
            key "Enter" to access U-Boot CLI.
          - Use the following commands to update the device to LEDE:
            run lfw
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
       2.Using httpd mode with Web UI connection and original LEDE image
          - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
          - Connect PC with one of LAN ports,press the reset button, power up
            the router and keep button pressed for around 6-7 seconds, until
            leds flashing.
          - Open your browser and enter 192.168.1.1,You will see the upgrade
            interface, select "openwrt-ar71xx-generic-xxx-squashfs-
            sysupgrade.bin" and click the upgrade button.
          - After that the device will reboot and boot to LEDE.
          - Wait until all LEDs stops flashing and use the router.
    
    Signed-off-by: 张鹏 <sd20@qxwlan.com>
    [cut out of bigger patch, keep swconfig, whitespace fixes]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-16m.dts
    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac-v2-8m.dts
    • target/linux/ath79/dts/qca9563_qxwlan_e1700ac.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ath79/image/generic.mk