Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder i386_pentium4 Build #103

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision291d79935e9c4a974b037b6bed733ce92d4242e3
Changes21 changes

BuildSlave:

fsf-dock-06

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. download downloading to cleanup.sh ( 0 secs )
    1. - no logs -
  4. cleanold Cleaning previous builds ( 1 mins, 12 secs )
    1. stdio
  5. cleanup Cleaning work area ( 1 secs )
    1. stdio
  6. mksdkdir Preparing SDK directory ( 0 secs )
    1. stdio
  7. downloadsdk Downloading SDK archive ( 11 secs )
    1. stdio
  8. unpacksdk Unpacking SDK archive ( 24 secs )
    1. stdio
  9. updatesdk Updating SDK ( 6 secs )
    1. stdio
  10. cleancmdlinks Sanitizing host command symlinks ( 0 secs )
    1. stdio
  11. writeversionmk downloading to getversion.mk ( 0 secs )
    1. - no logs -
  12. getversion property 'release_version' set ( 0 secs )
    1. stdio
    2. property changes
  13. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  14. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  15. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  16. mkdldir Preparing download directory ( 0 secs )
    1. stdio
  17. mkconf Preparing SDK configuration ( 5 secs )
    1. stdio
  18. download_1 downloading to ccache.sh ( 0 secs )
    1. - no logs -
  19. prepccache Preparing ccache ( 0 secs )
    1. stdio
  20. updatefeeds Updating feeds ( 2 mins, 52 secs )
    1. stdio
  21. installfeeds Installing feeds ( 10 secs )
    1. stdio
  22. logclear Clearing failure logs ( 0 secs )
    1. stdio
  23. compile Building packages ( 5 hrs, 32 mins, 52 secs )
    1. stdio
  24. mkfeedsconf Generating pinned feeds.conf ( 0 secs )
    1. stdio
  25. signprepare Ran ( 0 secs )
    1. stdio
  26. signpack Packing files to sign ( 0 secs )
    1. stdio
  27. upload uploading sign.tar.gz ( 8 secs )
    1. - no logs -
  28. signfiles Ran ( 2 secs )
    1. stdio
  29. download_2 downloading to sign.tar.gz ( 9 secs )
    1. - no logs -
  30. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  31. uploadprepare Preparing package directory ( 3 secs )
    1. stdio
  32. packageupload Uploading package files ( 1 mins, 56 secs )
    1. stdio
  33. logprepare Preparing log directory ( 2 secs )
    1. stdio
  34. logfind Finding failure logs ( 0 secs )
    1. stdio
  35. logcollect Collecting failure logs ( 0 secs )
    1. stdio
  36. logupload Uploading failure logs ( 2 secs )
    1. stdio
  37. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  38. sourceupload Uploading source archives ( 24 secs )
    1. stdio
  39. df Reporting disk usage ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/i386_pentium4 slave
buildername i386_pentium4 Builder
buildnumber 103 Build
codebase Build
nproc 8 SetPropertyFromCommand Step
project Build
release_version SNAPSHOT SetPropertyFromCommand Step
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 291d79935e9c4a974b037b6bed733ce92d4242e3 Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename fsf-dock-06 BuildSlave
workdir /builder/i386_pentium4 slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Alin Nastac
  3. Anderson Vulczak
  4. Christian Lamparter
  5. DENG Qingfang
  6. Daniel Golle
  7. David Bauer
  8. Hans Dedecker
  9. Kevin Darbyshire-Bryant
  10. Koen Vandeputte
  11. Robert Marko
  12. Rosen Penev
  13. Santiago Piccinini
  14. Satadru Pramanik
  15. Stijn Tintel

Timing:

StartSat Nov 30 21:36:15 2019
EndSun Dec 1 03:17:13 2019
Elapsed5 hrs, 40 mins, 58 secs

All Changes:

:

  1. Change #3858

    Category None
    Changed by Kevin Darbyshire-Bryant <ldirohnoyoudont@darbyshire-bryant.me.uk>
    Changed at Thu 21 Nov 2019 21:05:44
    Repository https://git.openwrt.org/feed/packages.git
    Branch master
    Revision 0b30945de038c39107be4b28f73fea58e87b01df

    Comments

    net/https-dns-proxy: Update to 2019-10-09
    Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

    Changed files

    • net/https-dns-proxy/Makefile
  2. Change #3859

    Category None
    Changed by Rosen Penev <rosenpohnoyoudont@gmail.com>
    Changed at Wed 27 Nov 2019 21:50:22
    Repository https://git.openwrt.org/feed/packages.git
    Branch master
    Revision f0eb182472dcbf18df511828b0287f1353684525

    Comments

    Merge pull request #10611 from ldir-EDB0/bumpdns
    net/https-dns-proxy: Update to 2019-10-09

    Changed files

    • no files
  3. Change #3860

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 27 Nov 2019 21:54:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c08ddfce3f8f4cffefd6ff83dcfdd6782dac31d3

    Comments

    ath79: rename EEPROM to art
    This renames all remaining occurrences of "EEPROM" to "art" to
    further harmonize the partition labelling in ath79. This will
    help to reduce the amount of user-space code and might be
    beneficial when code is copy/pasted in the future.
    
    Affected are only devices from Ubiquiti, where the XM board is
    already using "art" in ath79.
    
    Acked-by: Piotr Dymacz <pepe2k@gmail.com>
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9342_ubnt_lap-120.dts
    • target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts
    • target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts
    • target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts
    • target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
    • target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
    • target/linux/ath79/dts/qca9533_ubnt_acb-isp.dts
    • target/linux/ath79/dts/qca9563_ubnt_unifiac-lite.dtsi
    • target/linux/ath79/dts/qca9563_ubnt_unifiac-pro.dtsi
    • target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
  4. Change #3861

    Category None
    Changed by Anderson Vulczak <andiohnoyoudont@andi.com.br>
    Changed at Wed 27 Nov 2019 21:54:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9b90dc05f58c619962e69e36d275b6ea56893496

    Comments

    ath79: add support for TP-Link Archer C6 v2 (US) and A6 (US/TW)
    This patch is based on #1689 and adds support for TP-Link Archer
    C6 v2 (US) and A6 (US/TW).
    
    The hardware is the same as EU and RU variant, except for GPIOs
    (LEDS/Buttons), flash(chip/partitions) and UART being available
    on the board.
    
    - SOC: Qualcomm QCA9563 @ 775MHz
    - Flash: GigaDevice GD25Q127CS1G (16MiB)
    - RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
    - Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
    - Wireless:
      - 2.4GHz (bgn) QCA9563 integrated (3x3)
      - 5GHz (ac) Qualcomm QCA9886 (2x2)
    - Button: 1x power, 1x reset, 1x wps
    - LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
    - UART: 115200, 8n1 (header available on board)
    
    Known issues:
     - Wireless: 5GHz is known to have lower RSSI signal, it affects speed and range.
    
    Flash instructions:
    
    Upload openwrt-ath79-generic-tplink_archer-c6-v2-us-squashfs-factory.bin
    via the router Web interface.
    
    Flash instruction using tftp recovery:
    
    1. Connect the computer to one of the LAN ports of the router
    2. Set the computer IP to 192.168.0.66
    3. Start a tftp server with the OpenWrt factory image in the
       tftp root directory renamed to ArcherA6v2_tp_recovery.bin.
    4. Connect power cable to router, press and hold the
       reset button and turn the router on
    5. Keep the reset button pressed until the WPS LED lights up
    6. Wait ~150 seconds to complete flashing
    
    Flash partitioning: I've followed #1689 for defining the partition layout
    for this patch. The partition named as "tplink" @ 0xfd0000 is marked
    as read only as it is where some config for stock firmware are stored.
    On stock firmware those stock partitions starts at 0xfd9400 however
    I had not been able to make it functional starting on the same address as
    on stock fw, so it has been partitioned following #1689 and not the stock
    partition layout for this specific partition. Due to that firmware/rootfs
    partition lenght is 0xf80000 and not 0xf89400 as stock.
    
    According to the GPL code, the EU/RU/JP variant does have different GPIO pins
    assignment to LEDs and buttons, also the flash memory layout is different.
    
    GPL Source Code: https://static.tp-link.com/resources/gpl/gpl-A6v2_us.tar.gz
    
    Signed-off-by: Anderson Vulczak <andi@andi.com.br>
    [wrap commit message, remove soft_ver change for C6 v2 EU, move LED aliases
    to DTS files, remove dts-v1 in DTSI, node/property reorder in DTSI]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/qca9563_tplink_archer-c6-v2-us.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-c6-v2.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ath79/image/generic-tp-link.mk
    • tools/firmware-utils/src/tplink-safeloader.c
  5. Change #3862

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 27 Nov 2019 21:54:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c0b87cf10b0d277803f889afa8285796d9b3b4f8

    Comments

    tools: tplink-safeloader: fix whitespace issues
    This replaces tabs by spaces when preceding an equal sign. This improves
    consistency in the file and makes the indent look correct on all platforms.
    
    While at it, also fix one case of inconsistent leading spaces.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • tools/firmware-utils/src/tplink-safeloader.c
  6. Change #3863

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Wed 27 Nov 2019 21:54:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 118749271b311413307f0b6be91786d7ac368f8b

    Comments

    mpc85xx: add vendor to Makefile node name, derive SUPPORTED_DEVICES
    By adding the vendor to the Makefile device definition node name,
    one can derive the standard compatible used in SUPPORTED_DEVICES
    instead of having to specify it manually.
    
    Despite, this moves the naming scheme closer to what is used for
    other targets (ath79, ramips).
    
    Build-tested on all subtargets.
    Run-tested on TP-Link TL-WDR4900 v1.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/mpc85xx/image/Makefile
  7. Change #3864

    Category None
    Changed by Stijn Tintel <stijnohnoyoudont@linux-ipv6.be>
    Changed at Thu 28 Nov 2019 00:02:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 5f6833395293548f9fdf4897d9766417f2990bac

    Comments

    config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL
    Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

    Changed files

    • config/Config-kernel.in
  8. Change #3883

    Category None
    Changed by Daniel Golle <danielohnoyoudont@makrotopia.org>
    Changed at Thu 28 Nov 2019 23:09:48
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 9c272dd3e42a51c1343ed4fad54ac38bb97349dd

    Comments

    ucert: update to latest git HEAD
    e4bd927 cast ucert_argv to proper type when passing to execv
    
    Fixes warnings:
    
    warning: passing argument 2 of 'execv' from incompatible pointer type
    [-Wincompatible-pointer-types]
      254 |       execv(usign_argv[0], usign_argv)
    
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>

    Changed files

    • package/system/ucert/Makefile
  9. Change #3890

    Category None
    Changed by Koen Vandeputte <koen.vandeputteohnoyoudont@ncentric.com>
    Changed at Fri 29 Nov 2019 08:59:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 414b7c107aaa0e037b3f352e0650bbc429db41a7

    Comments

    kernel: bump 4.14 to 4.14.156
    Refreshed all patches.
    
    Compile-tested on: cns3xxx
    Runtime-tested on: cns3xxx
    
    Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

    Changed files

    • include/kernel-version.mk
    • target/linux/cns3xxx/patches-4.14/070-i2c_support.patch
    • target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch
    • target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch
    • target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch
    • target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch
    • target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch
    • target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch
    • target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch
    • target/linux/generic/backport-4.14/303-v4.16-netfilter-nf_tables-remove-multihook-chains-and-fami.patch
    • target/linux/generic/backport-4.14/335-v4.16-netfilter-nf_tables-add-single-table-list-for-all-fa.patch
    • target/linux/generic/pending-4.14/161-mtd-part-add-generic-parsing-of-linux-part-probe.patch
    • target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
    • target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
    • target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
    • target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
    • target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch
    • target/linux/layerscape/patches-4.14/810-kvm-support-layerscape.patch
    • target/linux/layerscape/patches-4.14/813-ifc-nor-nand-support-layerscape.patch
    • target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch
    • target/linux/mediatek/patches-4.14/0173-clk-mediatek-fixup-test-building-of-MediaTek-clock-d.patch
    • target/linux/oxnas/patches-4.14/500-oxnas-sata.patch
    • target/linux/ramips/patches-4.14/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
    • target/linux/ramips/patches-4.14/0045-i2c-add-mt7621-driver.patch
  10. Change #3891

    Category None
    Changed by Koen Vandeputte <koen.vandeputteohnoyoudont@ncentric.com>
    Changed at Fri 29 Nov 2019 08:59:49
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f19e471f3206d0b5885490e52972085d2da2a10b

    Comments

    kernel: bump 4.19 to 4.19.86
    Refreshed all patches.
    
    Altered patches:
    - 950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch
    - 0005-mtd-physmap_of-Move-custom-initialization.patch
    
    Remove upstreamed:
    - 0001-pinctrl-gemini-Mask-and-set-properly.patch
    - 0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch
    
    Compile-tested on: cns3xxx
    Runtime-tested on: cns3xxx
    
    Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

    Changed files

    • include/kernel-version.mk
    • target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
    • target/linux/brcm2708/patches-4.19/950-0041-bcm2708-framebuffer-driver.patch
    • target/linux/brcm2708/patches-4.19/950-0064-mfd-Add-Raspberry-Pi-Sense-HAT-core-driver.patch
    • target/linux/cns3xxx/patches-4.19/070-i2c_support.patch
    • target/linux/cns3xxx/patches-4.19/210-dwc2_defaults.patch
    • target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch
    • target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch
    • target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch
    • target/linux/generic/backport-4.19/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
    • target/linux/generic/hack-4.19/661-use_fq_codel_by_default.patch
    • target/linux/generic/hack-4.19/662-remove_pfifo_fast.patch
    • target/linux/generic/pending-4.19/220-optimize_inlining.patch
    • target/linux/generic/pending-4.19/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
    • target/linux/lantiq/patches-4.19/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
    • target/linux/lantiq/patches-4.19/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
    • target/linux/lantiq/patches-4.19/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
  11. Change #3896

    Category None
    Changed by Koen Vandeputte <koen.vandeputteohnoyoudont@ncentric.com>
    Changed at Fri 29 Nov 2019 16:05:38
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 7c76565d4ca0d0e20744a877d19318362566b58c

    Comments

    kernel: bump 4.9 to 4.9.205
    Refreshed all patches.
    
    Fixes:
    - CVE-2019-18660
    
    Compile-tested on: none
    Runtime-tested on: none
    
    Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

    Changed files

    • include/kernel-version.mk
    • target/linux/generic/backport-4.9/090-net-generalize-napi_complete_done.patch
    • target/linux/generic/pending-4.9/161-mtd-part-add-generic-parsing-of-linux-part-probe.patch
  12. Change #3897

    Category None
    Changed by Santiago Piccinini <spiccininiohnoyoudont@altermundi.net>
    Changed at Fri 29 Nov 2019 17:26:20
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c7fb12beb1d347f1cedc7890dbe2d441f70ccf62

    Comments

    mac80211: unify setup of iw htmode for mesh and adhoc
    This also fixes mac80211_prepare_vif iw set channel in monitor or
    mesh mode.
    
    Signed-off-by: Santiago Piccinini <spiccinini@altermundi.net>
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>
    [daniel@makrotopia.org: fixed commit message]

    Changed files

    • package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh
  13. Change #3900

    Category None
    Changed by Hans Dedecker <dedeckehohnoyoudont@gmail.com>
    Changed at Fri 29 Nov 2019 20:56:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f573e5756a351b73bc835fe3c1c8418c8fab37b3

    Comments

    netifd: update to latest git HEAD
    e45b140 interface: warn if ip6hint is truncated
    
    Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

    Changed files

    • package/network/config/netifd/Makefile
  14. Change #3901

    Category None
    Changed by Robert Marko <robertohnoyoudont@meshpoint.me>
    Changed at Fri 29 Nov 2019 23:53:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision c550b1acfc8105b3dcdca207410c45fbaf360fca

    Comments

    ipq40xx: use DTSI for Jalapeno
    Lets move common code for Jalapeno into DTSI, this way Jalapeno based
    boards don't introduce duplicate code.
    
    While at it, lets also fix some style issues and update to current DTS
    style.
    
    Signed-off-by: Robert Marko <robert@meshpoint.me>
    [commit description long line wrap]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
  15. Change #3902

    Category None
    Changed by Robert Marko <robertohnoyoudont@meshpoint.me>
    Changed at Fri 29 Nov 2019 23:53:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 146eb4925c7f32650f38cb52139696a827051700

    Comments

    ipq40xx: add support for Crisis Innovation Lab MeshPoint.One
    MeshPoint.One is Wi-Fi hotspot and smart IoT gateway (based upon
    Jalapeno module from 8Devices).
    
    MeshPoint.One (https://meshpointone.com) is a unique Wi-Fi hotspot and
    smart city gateway that can be installed and powered from street
    lighting (even solar power in the future).  MeshPoint provides up to 27
    hours of interrupted Wi-Fi and IoT services from internal battery even
    when external power is not available.  MeshPoint.One can be used for
    disaster relief efforts in order to provide instant Wi-Fi coverage that
    can be easily expanded by just adding more devices that create wide area
    mesh network.  MeshPoint.One devices have standard Luci UI for
    management.
    
    Features:
    - 1x 1Gpbs WAN
    - 1x 1Gbps LAN
    - POE input (eth0)
    - POE output (eth1)
    - Sensor for temperature, humidity and pressure (Bosch BME280)
    - current, voltage and power measurement via TI INA230
    - Hardware real time clock
    - optional power via Li-Ion battery
    - micro USB port with USB to serial chip for easy OpenWrt terminal
      access
    - I2C header for connecting additional sensors
    
    Installation:
    -------------
    Simply flash the sysupgrade image from stock firmware.
    
    Or use the built in Web recovery into bootloader:
    Hold Reset button for 5 to 20 seconds or use UART and httpd command.
    Web UI will appear on 192.168.2.100 by default.
    For web recovery use the factory.ubi image.
    
    Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
    Signed-off-by: Damir Franusic <damir.franusic@sartura.hr>
    Signed-off-by: Valent Turkovic <valent@meshpoint.me>
    Signed-off-by: Robert Marko <robert@meshpoint.me>
    [commit description long line wrap, usb->USB]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • target/linux/ipq40xx/base-files/etc/board.d/02_network
    • target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
    • target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
    • target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
    • target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts
    • target/linux/ipq40xx/image/Makefile
    • target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
  16. Change #3903

    Category None
    Changed by DENG Qingfang <dengqf6ohnoyoudont@mail2.sysu.edu.cn>
    Changed at Fri 29 Nov 2019 23:53:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision ca7f1ef575749e3e77961a86b00d9c5cbb9cab04

    Comments

    Revert "mt76: probe load mt7615 driver asynchronously"
    This reverts commit 81764319637f ("mt76: probe load mt7615 driver
    asynchronously").  After said commit, users report that MT7615 no longer
    works on boot and they have to manually enable WiFi (via command "wifi") to
    make it working again.
    
    Fixes: FS#2546
    Ref: https://forum.openwrt.org/t/xiaomi-r3p-no-wifi-on-boot/45509
    Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
    [commit description facelift]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • package/kernel/mt76/Makefile
  17. Change #3904

    Category None
    Changed by Alin Nastac <alin.nastacohnoyoudont@gmail.com>
    Changed at Fri 29 Nov 2019 23:53:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 839bc1e15ed5c0e00a68c95798b47ae0e279e4e9

    Comments

    glibc: backport fix for regexec buffer read overrun
    Problem found by AddressSanitizer[1]:
    
     Latest `grep` (git commit 1019e6e) compiled with asan may cause a
     heap-buffer-overflow when `-i` is specified.
    
         ./grep -i '\(\(\)*.\)*\(\)\(\)\1' /bin/chvt
    
     =================================================================
     ==16206==ERROR: AddressSanitizer: heap-buffer-overflow on address
    
    1. https://debbugs.gnu.org/34140
    
    Ref: https://sourceware.org/bugzilla/show_bug.cgi?id=24114
    Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
    [commit title and description facelift]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • toolchain/glibc/patches/001-regex-read-overrun.patch
  18. Change #3905

    Category None
    Changed by Satadru Pramanik <satadruohnoyoudont@umich.edu>
    Changed at Fri 29 Nov 2019 23:53:36
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f1410902e6c089a53935ab44e83207e877445bc5

    Comments

    busybox: add glibc dependency for vi regex option
    Build with musl libc fails with BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH
    enabled. Enabling BusyBox's vi regex search option depends upon GNU
    regex.  Musl libc does not support GNU regex[1].
    
    So this patch adds explicit dependency on GNU libc and while at it
    remove the FIXME comment.
    
    1. https://wiki.musl-libc.org/functional-differences-from-glibc.html
    
    Ref: https://dev.archive.openwrt.org/ticket/21741.html
    Ref: https://forum.openwrt.org/t/busybox-not-compiling/
    Ref: https://github.com/openwrt/packages/issues/4453
    Signed-off-by: Satadru Pramanik <satadru@umich.edu>
    [commit subject/description tweaks, From: fix, USE_GLIBC fix, removed comments]
    Signed-off-by: Petr Štetiar <ynezz@true.cz>

    Changed files

    • package/utils/busybox/config/editors/Config.in
  19. Change #3909

    Category None
    Changed by Christian Lamparter <chunkeeyohnoyoudont@gmail.com>
    Changed at Sat 30 Nov 2019 12:21:20
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 82a741c774dc1aa1e2c2e4b2e445bf79158de1a1

    Comments

    mac80211: switch to upstream owl-loader driver
    The Owl Loader (named after the codename that Atheros gave
    these devices back in the day) has been accepted upstream.
    
    This patch removes the "misc" driver OpenWrt had and adds
    the remaining differences against the version that ships
    with 5.4-rc1 into a separate "120-owl-loader-compat.patch"
    file that can be cut down once AR71XX is being dealt with.
    
    Note: I decided to keep the existing (kmod-)owl-loader
    package name around for now. The kernel module file in
    the kmod package will be called ath9k_pci_owl_loader.ko
    though.
    
    Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
    Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

    Changed files

    • package/kernel/linux/modules/wireless.mk
    • package/kernel/mac80211/ath.mk
    • package/kernel/mac80211/patches/ath/101-ath9k-use-iowrite32-over-__raw_writel.patch
    • package/kernel/mac80211/patches/ath/120-owl-loader-compat.patch
    • target/linux/generic/files/drivers/misc/owl-loader.c
    • target/linux/generic/hack-4.14/835-misc-owl_loader.patch
    • target/linux/generic/hack-4.19/835-misc-owl_loader.patch
    • target/linux/generic/hack-4.9/835-misc-owl_loader.patch
  20. Change #3910

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Sat 30 Nov 2019 15:49:05
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 3f79aaa2979793c054eae2c8b4058c8c7fccdbe7

    Comments

    generic ar8xxx: increase VLAN table for AR83x7
    The Atheros AR8327 and AR8337 have (according to their datasheet) a
    VLAN table with a maximum of 4096 entries.
    
    Currently, there's a hard limit of 128 VLANs, which is the same as
    for most other Atheros switches. Increase this limit only for the
    AR83x7 series and modify some shared functions to allow them to work
    with a variable max VLAN count.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • target/linux/generic/files/drivers/net/phy/ar8216.c
    • target/linux/generic/files/drivers/net/phy/ar8216.h
    • target/linux/generic/files/drivers/net/phy/ar8327.c
  21. Change #3911

    Category None
    Changed by Stijn Tintel <stijnohnoyoudont@linux-ipv6.be>
    Changed at Sat 30 Nov 2019 18:19:12
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 291d79935e9c4a974b037b6bed733ce92d4242e3

    Comments

    octeon: fix sysupgrade
    Sysupgrade was failing due to incorrect replacement of backticks:
    /sbin/sysupgrade: /lib/upgrade/platform.sh: line 101: syntax error: missing '))'
    
    Fixes: 0bbfc3dff719 ("octeon: replace backticks by $(...)")
    Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

    Changed files

    • target/linux/octeon/base-files/lib/upgrade/platform.sh