Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Builder i386_pentium4 Build #295

Results:

Build successful

SourceStamp:

Repositoryhttps://git.openwrt.org/openwrt/openwrt.git
Branchmaster
Revision556eb9872d017bb98477f8436152805124fa639d
Changes31 changes

BuildSlave:

truecz-dock-01

Reason:

The SingleBranchScheduler scheduler named 'all' triggered this build

Steps and Logfiles:

  1. sharedwd Setting up shared work directory ( 0 secs )
    1. stdio
  2. nproc property 'nproc' set ( 0 secs )
    1. stdio
    2. property changes
  3. download downloading to cleanup.sh ( 0 secs )
    1. - no logs -
  4. cleanold Cleaning previous builds ( 18 secs )
    1. stdio
  5. cleanup Cleaning work area ( 0 secs )
    1. stdio
  6. mksdkdir Preparing SDK directory ( 0 secs )
    1. stdio
  7. downloadsdk Downloading SDK archive ( 21 secs )
    1. stdio
  8. unpacksdk Unpacking SDK archive ( 7 secs )
    1. stdio
  9. updatesdk Updating SDK ( 4 secs )
    1. stdio
  10. cleancmdlinks Sanitizing host command symlinks ( 0 secs )
    1. stdio
  11. writeversionmk downloading to getversion.mk ( 0 secs )
    1. - no logs -
  12. getversion property 'release_version' set ( 0 secs )
    1. stdio
    2. property changes
  13. dlkeybuildpub downloading to key-build.pub ( 0 secs )
    1. - no logs -
  14. dlkeybuild downloading to key-build ( 0 secs )
    1. - no logs -
  15. dlkeybuilducert downloading to key-build.ucert ( 0 secs )
    1. - no logs -
  16. mkdldir Preparing download directory ( 0 secs )
    1. stdio
  17. mkconf Preparing SDK configuration ( 3 secs )
    1. stdio
  18. download_1 downloading to ccache.sh ( 0 secs )
    1. - no logs -
  19. prepccache Preparing ccache ( 0 secs )
    1. stdio
  20. updatefeeds Updating feeds ( 34 secs )
    1. stdio
  21. installfeeds Installing feeds ( 5 secs )
    1. stdio
  22. logclear Clearing failure logs ( 0 secs )
    1. stdio
  23. compile Building packages ( 3 hrs, 33 mins, 8 secs )
    1. stdio
  24. mkfeedsconf Generating pinned feeds.conf ( 0 secs )
    1. stdio
  25. signprepare Ran ( 0 secs )
    1. stdio
  26. signpack Packing files to sign ( 0 secs )
    1. stdio
  27. upload uploading sign.tar.gz ( 0 secs )
    1. - no logs -
  28. signfiles Ran ( 2 secs )
    1. stdio
  29. download_2 downloading to sign.tar.gz ( 0 secs )
    1. - no logs -
  30. signunpack Unpacking signed files ( 0 secs )
    1. stdio
  31. uploadprepare Preparing package directory ( 0 secs )
    1. stdio
  32. packageupload Uploading package files ( 1 mins, 13 secs )
    1. stdio
  33. logprepare Preparing log directory ( 0 secs )
    1. stdio
  34. logfind Finding failure logs ( 0 secs )
    1. stdio
  35. logcollect Collecting failure logs ( 0 secs )
    1. stdio
  36. logupload Uploading failure logs ( 1 secs )
    1. stdio
  37. sourcelist Finding source archives to upload ( 0 secs )
    1. stdio
  38. sourceupload Uploading source archives ( 1 secs )
    1. stdio
  39. df Reporting disk usage ( 0 secs )
    1. stdio

Build Properties:

NameValueSource
branch master Build
builddir /builder/i386_pentium4 slave
buildername i386_pentium4 Builder
buildnumber 295 Build
codebase Build
nproc 8 SetPropertyFromCommand Step
project Build
release_version SNAPSHOT SetPropertyFromCommand Step
repository https://git.openwrt.org/openwrt/openwrt.git Build
revision 556eb9872d017bb98477f8436152805124fa639d Build
scheduler all Scheduler
shared_wd True BuildSlave
slavename truecz-dock-01 BuildSlave
workdir /builder/i386_pentium4 slave (deprecated)

Forced Build Properties:

NameLabelValue

Responsible Users:

  1. Adrian Schmutzler
  2. Antti Seppälä
  3. DENG Qingfang
  4. Daniel Golle
  5. Daniel González Cabanelas
  6. David Bauer
  7. Hans Dedecker
  8. Hauke Mehrtens
  9. John Audia
  10. Kevin Darbyshire-Bryant
  11. Leon M. George
  12. Paul Spooren
  13. Rowan Border
  14. Rui Salvaterra
  15. Scott Roberts
  16. Sungbo Eo
  17. Álvaro Fernández Rojas

Timing:

StartSun Jul 5 11:49:41 2020
EndSun Jul 5 15:25:47 2020
Elapsed3 hrs, 36 mins, 5 secs

All Changes:

:

  1. Change #10595

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Mon 29 Jun 2020 10:24:01
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision e959048c128e4350b78df653be7cd7277787518e

    Comments

    ramips: add support for RAVPower RP-WD009
    The RAVPower RP-WD009 is a batter-powered pocket sized router with SD
    card lot and USB port.
    
    Hardware
    --------
    CPU:   MediaTek MT7628AN
    RAM:   64M DDR2
    FLASH: 16M GigaDevices SPI-NOR
    WLAN:  MediaTek MT7628AN 2T2R b/g/n
           MediaTek MT7610E  1T1R n/ac
    ETH:   1x FastEthernet
    SD:    SD Card slot
    USB:   USB 2.0
    
    Custom PMIC on the I2C bus (address 0x0a).
    
    Installation
    ------------
    
    1. Press and hold down the reset button.
    
    2. Power up the Device. Keep pressing the reset button for 10
       more seconds until the Globe LED lights up.
    
    3. Attach your Computer to the Ethernet port. Assign yourself the
       address 10.10.10.1/24.
    
    4. Access the recovery page at 10.10.10.128 and upload the OpenWrt
       factory image.
    
    5. The flashing will take around 1 minute. The device will reboot
       automatically into OpenWrt.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • package/boot/uboot-ramips/Makefile
    • package/boot/uboot-ramips/patches/0001-add-support-for-RAVPower-RP-WD009.patch
    • target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts
    • target/linux/ramips/image/Makefile
    • target/linux/ramips/image/mt76x8.mk
    • target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
  2. Change #10596

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Mon 29 Jun 2020 10:24:04
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 1ba0466d43efd03621eb491a4c52b5ae16f2ace5

    Comments

    package: add ravpower-mcu package
    This package allows to read battery status information and control the
    power state of the RAVPower RP-WD009 power management IC.
    
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • package/utils/ravpower-mcu/Makefile
    • target/linux/ramips/image/mt76x8.mk
  3. Change #10597

    Category None
    Changed by David Bauer <mailohnoyoudont@david-bauer.net>
    Changed at Mon 29 Jun 2020 13:55:55
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 5667ccbf1662a1a9f510637ed3a6718f3350a873

    Comments

    ramips: remove duplicate MAC assignment case
    Cudy WR1000 and Wavlink WL-WN577A2 store WAN as well as label MAC address
    at the same position in flash.
    
    Suggested-by: Sungbo Eo <mans0n@gorani.run>
    Signed-off-by: David Bauer <mail@david-bauer.net>

    Changed files

    • target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
  4. Change #10628

    Category None
    Changed by Kevin Darbyshire-Bryant <ldirohnoyoudont@darbyshire-bryant.me.uk>
    Changed at Tue 30 Jun 2020 08:34:06
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 3fda01a51efe37983f4108945646ca7e07f46ef8

    Comments

    kernel: cake: renumber backport patches
    Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

    Changed files

    • target/linux/generic/backport-4.19/390-v5.1-sch_cake-Make-the-dual-modes-fairer.patch
    • target/linux/generic/backport-4.19/391-v5.1-sch_cake-Permit-use-of-connmarks-as-tin-classifiers.patch
    • target/linux/generic/backport-4.19/392-v5.1-sch_cake-Interpret-fwmark-parameter-as-a-bitmask.patch
    • target/linux/generic/backport-4.19/393-v5.4-sch_cake-drop-unused-variable-tin_quantum_prio.patch
    • target/linux/generic/backport-4.19/394-v5.4-sch_cake-Add-missing-NLA-policy-entry-TCA_CAKE_SPLIT.patch
    • target/linux/generic/backport-5.4/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
  5. Change #10629

    Category None
    Changed by Kevin Darbyshire-Bryant <ldirohnoyoudont@darbyshire-bryant.me.uk>
    Changed at Tue 30 Jun 2020 08:34:17
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4ca4c942679a3f19c9bc588ce40079886a528538

    Comments

    kernel: cake: skb hash backport to 419
    Commit 7b4877c2040a63332cd1f10023c51698fec2ed98 backported to 5.4 only,
    backport to 4.19 as well.
    
    Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

    Changed files

    • target/linux/generic/backport-4.19/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
  6. Change #10630

    Category None
    Changed by Kevin Darbyshire-Bryant <ldirohnoyoudont@darbyshire-bryant.me.uk>
    Changed at Tue 30 Jun 2020 08:34:24
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 77cd8f64ca261bfb3cf5a905fb2f227981934613

    Comments

    kernel: cake: backport unused var patch to 5.4
    This was backported to 4.19 and I clearly expected it to land in 5.4 but
    it didn't (5.5) so backport it to 5.4 for consistency.
    
    Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

    Changed files

    • target/linux/generic/backport-4.19/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
    • target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
  7. Change #10633

    Category None
    Changed by Kevin Darbyshire-Bryant <ldirohnoyoudont@darbyshire-bryant.me.uk>
    Changed at Tue 30 Jun 2020 15:09:18
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d59dc14515c812ba4c4101958bdc5dba37ab34cb

    Comments

    kernel: cake: backport upstream tweaks & fixes
    From upstream:
    b8392808eb3f sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling
    3f608f0c4136 sch_cake: fix a few style nits
    8c95eca0bb8c sch_cake: don't call diffserv parsing code when it is not needed
    9208d2863ac6 sch_cake: don't try to reallocate or unshare skb unconditionally
    
    From netdev not yet accepted:
    sch_cake: fix IP protocol handling in the presence of VLAN tags
    
    The VLAN tag handling is actually wider than just cake so upstream are
    working out how to fix it generically.  We fix it here just for cake.
    
    Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

    Changed files

    • target/linux/generic/backport-4.19/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
    • target/linux/generic/backport-4.19/396-5.8-sch_cake-don-t-try-to-reallocate-or-unshare-skb-unco.patch
    • target/linux/generic/backport-4.19/397-5.8-sch_cake-don-t-call-diffserv-parsing-code-when-it-is.patch
    • target/linux/generic/backport-4.19/398-5.8-sch_cake-fix-a-few-style-nits.patch
    • target/linux/generic/backport-4.19/399-5.9-sch_cake-add-RFC-8622-LE-PHB-support-to-CAKE-diffser.patch
    • target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
    • target/linux/generic/backport-5.4/395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch
    • target/linux/generic/backport-5.4/396-5.8-sch_cake-don-t-try-to-reallocate-or-unshare-skb-unco.patch
    • target/linux/generic/backport-5.4/397-5.8-sch_cake-don-t-call-diffserv-parsing-code-when-it-is.patch
    • target/linux/generic/backport-5.4/398-5.8-sch_cake-fix-a-few-style-nits.patch
    • target/linux/generic/backport-5.4/399-5.9-sch_cake-add-RFC-8622-LE-PHB-support-to-CAKE-diffser.patch
    • target/linux/generic/hack-4.19/641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch
    • target/linux/generic/hack-5.4/641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch
  8. Change #10634

    Category None
    Changed by Rowan Border <rowanjborderohnoyoudont@gmail.com>
    Changed at Tue 30 Jun 2020 15:23:32
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 33fae8421e3270869c645fd304523133419d7f5d

    Comments

    ramips: add support for TP-Link RE220 v2
    TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
    WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.
    
    This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at>
    for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
    and GPIO pinout.
    
    Specifications
    
    MediaTek MT7628AN (580 Mhz)
    64 MB of RAM
    8 MB of FLASH
    2T2R 2.4 GHz and 1T1R 5 GHz
    1x 10/100 Mbps Ethernet
    UART header on PCB (57600 8n1)
    8x LED (GPIO-controlled), 2x button
    There are 2.4G and 5G LEDs in red and green which are controlled separately.
    
    Web Interface Installation
    
    It is possible to upgrade to OpenWrt via the web interface. Simply flash
    the -factory.bin from OEM. In contrast to a stock firmware, this will not
    overwrite U-Boot.
    
    Signed-off-by: Rowan Border <rowanjborder@gmail.com>

    Changed files

    • target/linux/ramips/dts/mt7628an_tplink_re220-v2.dts
    • target/linux/ramips/image/mt76x8.mk
    • target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
    • target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
    • tools/firmware-utils/src/tplink-safeloader.c
  9. Change #10636

    Category None
    Changed by Rui Salvaterra <rsalvaterraohnoyoudont@gmail.com>
    Changed at Tue 30 Jun 2020 17:01:18
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 69ca308673337b2759d5b188c8d5a4bc73405cb5

    Comments

    dropbear: init: replace backticks with $()
    This replaces deprecated backticks by more versatile $(...) syntax.
    
    Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
    [add commit description]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • package/network/services/dropbear/files/dropbear.init
  10. Change #10637

    Category None
    Changed by Rui Salvaterra <rsalvaterraohnoyoudont@gmail.com>
    Changed at Tue 30 Jun 2020 17:03:15
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 835c932ccb6bb43ea94fb28a76fca2019a2f917c

    Comments

    zram-swap: init: replace backticks with $()
    This replaces deprecated backticks by more versatile $(...) syntax.
    
    Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
    [add commit description]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • package/system/zram-swap/files/zram.init
  11. Change #10639

    Category None
    Changed by Hans Dedecker <dedeckehohnoyoudont@gmail.com>
    Changed at Tue 30 Jun 2020 20:13:46
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d4c80f5b172e3e3a209fdd64c73be535e360db34

    Comments

    dropbear: bump to 2020.80
    - drop patches (applied upstream)
     * 001-backport_GNU_SOURCE-for-random.patch
     * 002-backport-move-GNU_SOURCE-earlier.patch
     * 010-backport-disable-toom-and-karatsuba.patch
    
    Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

    Changed files

    • package/network/services/dropbear/Makefile
    • package/network/services/dropbear/patches/001-backport_GNU_SOURCE-for-random.patch
    • package/network/services/dropbear/patches/002-backport-move-GNU_SOURCE-earlier.patch
    • package/network/services/dropbear/patches/010-backport-disable-toom-and-karatsuba.patch
  12. Change #10652

    Category None
    Changed by Paul Spooren <mailohnoyoudont@aparcar.org>
    Changed at Tue 30 Jun 2020 22:21:10
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 263f7e5bbd119ebed1f514c16f659a2e2a2b132c

    Comments

    build: store default/device packages in JSON
    With this commit the `profiles.json` contain both the target specific
    `default_packages` as well as the device specific `device_packages` as a
    array of strings.
    
    This information is required for downstream projects like the various
    web-based interactive firmware generators.
    
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>
    Signed-off-by: Paul Spooren <mail@aparcar.org>

    Changed files

    • include/image.mk
    • scripts/json_add_image_info.py
    • scripts/json_overview_image_info.py
  13. Change #10659

    Category None
    Changed by Álvaro Fernández Rojas <noltariohnoyoudont@gmail.com>
    Changed at Wed 01 Jul 2020 13:39:15
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f786de2095b2c56ab290884498862df6b49f0038

    Comments

    ath10k-ct: update to version 2020-06-30
    Backports commit "a1769bb68a850508a492e3674ab1e5e479b11254", which reverts
    upstream commit "76d164f582150fd0259ec0fcbc485470bcd8033e" (ath10k: fix DMA
    related firmware crashes on multiple devices).
    
    Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

    Changed files

    • package/kernel/ath10k-ct/Makefile
    • package/kernel/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
    • package/kernel/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch
    • package/kernel/ath10k-ct/patches/205-ath10k-Add-NL80211_EXT_FEATURE_AQL-flag.patch
  14. Change #10662

    Category None
    Changed by Hans Dedecker <dedeckehohnoyoudont@gmail.com>
    Changed at Wed 01 Jul 2020 20:19:50
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision cbb66f9edb4dc5fd60a6c262fde84cc570801b84

    Comments

    curl: bump to 7.71.0
    For changes in 7.71.0; see https://curl.haxx.se/changes.html#7_71_0
    
    Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

    Changed files

    • package/network/utils/curl/Makefile
    • package/network/utils/curl/patches/200-no_docs_tests.patch
  15. Change #10705

    Category None
    Changed by Sungbo Eo <mans0nohnoyoudont@gorani.run>
    Changed at Thu 02 Jul 2020 19:34:37
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 736995ce19ec6f734193d437fb7c1febbc8fa282

    Comments

    ath79: rearrange nand node by register address
    All other nodes in the DTS are placed in order of address space. Harmonize
    the nand nodes as well.
    
    Signed-off-by: Sungbo Eo <mans0n@gorani.run>

    Changed files

    • target/linux/ath79/dts/ar934x.dtsi
    • target/linux/ath79/dts/qca955x.dtsi
  16. Change #10723

    Category None
    Changed by Paul Spooren <mailohnoyoudont@aparcar.org>
    Changed at Fri 03 Jul 2020 14:28:05
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision f09b9319c666e343763c7618878a503ad7eb7531

    Comments

    build,json: store arch_packages in profiles.json
    The `arch_packages` contains the supported package architecture.
    
    Previously it was necessary to parse the `Packages` index for the line
    `Architecture:`, requiring both an additional parser and file download.
    
    Signed-off-by: Paul Spooren <mail@aparcar.org>

    Changed files

    • scripts/json_overview_image_info.py
  17. Change #10724

    Category None
    Changed by Leon M. George <leonohnoyoudont@georgemail.eu>
    Changed at Fri 03 Jul 2020 15:37:02
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a0bb356612fddf747893fffbfa216dcb3c05f069

    Comments

    ath79: add support for Compex WPJ344
    Specifications:
    
    SoC: AR9344
    DRAM: 128MB DDR2
    Flash: 16MB SPI-NOR
    2 Gigabit ethernet ports
    2×2 2.4GHz on-board radio
    miniPCIe slot that supports 5GHz radio
    PoE 48V IEEE 802.3af/at - 24V passive optional
    USB 2.0 header
    
    Installation:
    
    To install, either start tftp in bin/targets/ath79/generic/ and use
    the u-boot prompt over UART:
    
    tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin
    erase 0x9f030000 +$filesize
    erase 0x9f680000 +1
    cp.b $fileaddr 0x9f030000 $filesize
    boot
    
    The cpximg file can be used with sysupgrade in the stock firmware (add
    SSH key in luci for root access) or with the built-in cpximg loader.
    The cpximg loader can be started either by holding the reset button
    during power up or by entering the u-boot prompt and entering 'cpximg'.
    Once it's running, a TFTP-server under 192.168.1.1 will accept the image
    appropriate for the board revision that is etched on the board.
    
    For example, if the board is labelled '6A08':
    
    tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bin
    
    MAC addresses:
    
    <&uboot 0x2e010>  *:99  (label)
    <&uboot 0x2e018>  *:9a
    <&uboot 0x2e020>  *:9b
    <&uboot 0x2e028>  *:9c
    
    Only the first two are used (for ethernet), the WiFi modules have
    separate (valid) addresses. The latter two addresses are not used.
    
    Signed-off-by: Leon M. George <leon@georgemail.eu>
    [minor commit message adjustments, drop gpio in DTS, DTS style fixes,
    sorting, drop unused cpximg recipe]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9344_compex_wpj344-16m.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/board.d/02_network
    • target/linux/ath79/image/generic.mk
  18. Change #10725

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Fri 03 Jul 2020 15:37:02
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision dc1280ef652c6522269c7a864810c19362d33dc4

    Comments

    ath79: enable gpio on ar933x by default
    All other SoC DTSI files have gpio enabled by default, only
    ar9330/ar9331 disable it by default, only to have it enabled again
    afterwards for each individual device.
    
    So, do not disable it in the first place, and drop all device-specific
    status statements afterwards.
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar9330.dtsi
    • target/linux/ath79/dts/ar9330_dlink_dir-505.dts
    • target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
    • target/linux/ath79/dts/ar9330_pqi_air-pen.dts
    • target/linux/ath79/dts/ar9331_8dev_carambola2.dts
    • target/linux/ath79/dts/ar9331_alfa-network_ap121f.dts
    • target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
    • target/linux/ath79/dts/ar9331_etactica_eg200.dts
    • target/linux/ath79/dts/ar9331_glinet_64xx.dtsi
    • target/linux/ath79/dts/ar9331_pisen_ts-d084.dts
    • target/linux/ath79/dts/ar9331_pisen_wmm003n.dts
    • target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts
    • target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts
    • target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
    • target/linux/ath79/dts/ar9331_tplink_tl-wr710n-v1.dts
    • target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi
  19. Change #10726

    Category None
    Changed by Adrian Schmutzler <freifunkohnoyoudont@adrianschmutzler.de>
    Changed at Fri 03 Jul 2020 15:37:02
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision b123ffdf6ebaa3108524bb50d306d6ae73ff7405

    Comments

    ath79: drop redundant status for gpio target-wide
    All definitions of gpio in SoC DTSI files do not set status, i.e.
    have it enabled. This drops all remaining redundant "status = okay"
    definitions in descendent files (mostly older ones).
    
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ath79/dts/ar7241_tplink.dtsi
    • target/linux/ath79/dts/ar7241_tplink_tl-wr842n-v1.dts
    • target/linux/ath79/dts/ar9341_pcs_cr3000.dts
    • target/linux/ath79/dts/ar9341_pisen_wmb001n.dts
    • target/linux/ath79/dts/ar9342_ubnt_wa.dtsi
    • target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
    • target/linux/ath79/dts/ar9344_aerohive_hiveap-121.dts
    • target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts
    • target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts
    • target/linux/ath79/dts/ar9344_netgear_wndr.dtsi
    • target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
    • target/linux/ath79/dts/ar9344_pcs_cap324.dts
    • target/linux/ath79/dts/ar9344_pcs_cr5000.dts
    • target/linux/ath79/dts/ar9344_qihoo_c301.dts
    • target/linux/ath79/dts/ar9344_wd_mynet-n750.dts
    • target/linux/ath79/dts/ar9344_zbtlink_zbt-wd323.dts
    • target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi
    • target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts
    • target/linux/ath79/dts/qca9558_tplink_archer-c.dtsi
    • target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi
    • target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
    • target/linux/ath79/dts/qca9558_trendnet_tew-823dru.dts
    • target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts
    • target/linux/ath79/dts/qca9561_avm_fritz4020.dts
    • target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi
    • target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q.dts
    • target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
    • target/linux/ath79/dts/qca9563_phicomm_k2t.dts
    • target/linux/ath79/dts/qca9563_rosinson_wr818.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts
    • target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi
    • target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
    • target/linux/ath79/dts/qca9563_tplink_re450.dtsi
    • target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
    • target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi
    • target/linux/ath79/dts/qca9563_yuncore_xd4200.dtsi
  20. Change #10727

    Category None
    Changed by Sungbo Eo <mans0nohnoyoudont@gorani.run>
    Changed at Fri 03 Jul 2020 17:48:51
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 91472dc2ce051d255eecb7fbba3484de917fa65d

    Comments

    kirkwood: support for button in Pogoplug V4
    Pogoplug V4 has a reset button on a GPIO pin.
    To use it, kmod-gpio-button-hotplug package needs to be installed.
    
    Signed-off-by: Sungbo Eo <mans0n@gorani.run>

    Changed files

    • target/linux/kirkwood/image/Makefile
  21. Change #10728

    Category None
    Changed by John Audia <grayskyohnoyoudont@archlinux.us>
    Changed at Fri 03 Jul 2020 18:38:06
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 472f5b147412282278007d304c6a5595f07b6851

    Comments

    ipq806x: refresh config
    Based on "make kernel_menuconfig CONFIG_TARGET=generic" and 5.4.49
    
    CONFIG_LEDS_TRIGGER_DISK has been removed by the refresh and added
    back manually in order to not revert f93fcf8923aa ("ipq806x: enable
    disk-activity LED trigger").
    
    Signed-off-by: John Audia <graysky@archlinux.us>
    [extend commit message]
    Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

    Changed files

    • target/linux/ipq806x/config-5.4
  22. Change #10729

    Category None
    Changed by Antti Seppälä <a.seppalaohnoyoudont@gmail.com>
    Changed at Fri 03 Jul 2020 18:48:05
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a175bc8f36a43a562e1d1c38f5ff02f4f338dd4d

    Comments

    ath79: add support for GL.iNet GL-MiFi
    Add support for the ar71xx supported GL.iNet GL-MiFi to ath79.
    
    Specifications:
     - Atheros AR9331
     - 64 MB of RAM
     - 16 MB of FLASH (SPI NOR)
     - 2x 10/100/1000 Mbps Ethernet
     - 2.4GHz (AR9330), 802.11b/g/n
     - 1x USB 2.0 (vbus driven by GPIO)
     - 4x LED, driven by GPIO
     - 1x button (reset)
     - 1x mini pci-e slot (vcc driven by GPIO)
    
    Flash instructions:
    
    Vendor software is based on openwrt so you can flash the sysupgrade
    image via the vendor GUI or using command line sysupgrade utility.
    Make sure to not save configuration over reflash as uci settings
    differ between versions.
    
    Note on MAC addresses:
    
    Even though the platform is capable to providing separate MAC addresses
    to the interfaces vendor firmware does not seem to take advantage of
    that. It appears that there is only single unique pre-programmed
    address in the art partition and vendor firmware uses that for
    every interface (eth0/eth1/wlan0). Similar behaviour has also been
    implemented in this patch.
    
    Note on GPIOs:
    
    In vendor firmware the gpio controlling mini pci-e slot is named
    3gcontrol while it actually controls power supply to the entire mini
    pci-e slot. Therefore a more descriptive name (minipcie) was chosen.
    Also during development of this patch it became apparent that the
    polarity of the signal is actually active low rather than active high
    that can be found in vendor firmware.
    
    Acknowledgements:
    
    This patch is based on earlier work[1] done by Kyson Lok. Since the
    initial mailing-list submission the patch has been modified to comply
    with current openwrt naming schemes and dts conventions.
    
    [1] http://lists.openwrt.org/pipermail/openwrt-devel/2018-September/019576.html
    
    Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

    Changed files

    • target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts
    • target/linux/ath79/generic/base-files/etc/board.d/01_leds
    • target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
    • target/linux/ath79/image/generic.mk
  23. Change #10730

    Category None
    Changed by Daniel Golle <danielohnoyoudont@makrotopia.org>
    Changed at Fri 03 Jul 2020 21:09:24
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 3b0f698760ae3a62173a28f18e9e1e3adef9c492

    Comments

    build,json: fix build failure in case no data is found
    Only collect arch_packages if actually generating any output.
    
    Fixes: commit f09b9319 ("build,json: store arch_packages in profiles.json"(
    Signed-off-by: Daniel Golle <daniel@makrotopia.org>
    Signed-off-by: Paul Spooren <mail@aparcar.org>

    Changed files

    • scripts/json_overview_image_info.py
  24. Change #10754

    Category None
    Changed by Hauke Mehrtens <haukeohnoyoudont@hauke-m.de>
    Changed at Sat 04 Jul 2020 14:04:21
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 4bb5e331a781c2d4f3040c70df328b1ef90f1871

    Comments

    kernel: Fix ath79 DSP exception at bootup
    This resolves a hazard between a mtc0 and a mfc0 instruction after
    activating the DSP support. Without this fix the CPU could use the old
    value again and the DSP support would not be active.
    
    Fixes: FS#2928, FS#2899
    Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
    Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300]
    Tested-by: David Bauer <mail@david-bauer.net> [ocedo_koala/ocedo_raccoon]

    Changed files

    • target/linux/generic/pending-4.19/350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch
    • target/linux/generic/pending-5.4/350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch
  25. Change #10762

    Category None
    Changed by DENG Qingfang <dengqf6ohnoyoudont@mail2.sysu.edu.cn>
    Changed at Sat 04 Jul 2020 19:00:11
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 78b632134f1597e4cc6498a7bb913c4f9b036caf

    Comments

    libjson-c: update to 0.14
    Update libjson-c to 0.14
    Changelog: https://github.com/json-c/json-c/wiki/Notes-for-v0.14-release
    
    Switch to CMake because the upstream build system was changed
    
    ipk size increased by 2KB
    
    Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

    Changed files

    • package/libs/libjson-c/Makefile
    • package/libs/libjson-c/patches/000-libm.patch
    • package/libs/libjson-c/patches/001-Fix-CVE-2020-12762.patch
    • package/libs/libjson-c/patches/001-Protect-array_list_del_idx-against-size_t-overflow.patch
    • package/libs/libjson-c/patches/002-Prevent-division-by-zero-in-linkhash.patch
    • package/libs/libjson-c/patches/003-Fix-integer-overflows.patch
    • package/libs/libjson-c/patches/004-Issue-599-Fix-the-backwards-check-in-lh_table_insert.patch
  26. Change #10763

    Category None
    Changed by Hauke Mehrtens <haukeohnoyoudont@hauke-m.de>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision ce958dd88a7e74cd7aa7c345c97c79556bc2d926

    Comments

    kernel: Update kernel 4.14 to version 4.14.187
    Fixes:
    - CVE-2020-10757
    
    The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
    backported which needed some adaptations to other code.
    
    Build tested: ramips
    
    Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

    Changed files

    • include/kernel-version.mk
    • target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
    • target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c
    • target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c
    • target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c
    • target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch
    • target/linux/generic/backport-4.14/025-tcp-allow-drivers-to-tweak-TSQ-logic.patch
    • target/linux/generic/backport-4.14/030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch
    • target/linux/generic/backport-4.14/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
    • target/linux/generic/backport-4.14/324-v4.16-netfilter-flow-table-support-for-IPv6.patch
    • target/linux/generic/backport-4.14/350-v4.18-ipv6-make-ip6_dst_mtu_forward-inline.patch
    • target/linux/generic/hack-4.14/207-disable-modorder.patch
    • target/linux/generic/hack-4.14/220-gc_sections.patch
    • target/linux/generic/hack-4.14/260-crypto_test_dependencies.patch
    • target/linux/generic/hack-4.14/661-use_fq_codel_by_default.patch
    • target/linux/generic/hack-4.14/662-remove_pfifo_fast.patch
    • target/linux/generic/hack-4.14/721-phy_packets.patch
    • target/linux/generic/hack-4.14/901-debloat_sock_diag.patch
    • target/linux/generic/hack-4.14/902-debloat_proc.patch
    • target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
    • target/linux/generic/pending-4.14/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
    • target/linux/generic/pending-4.14/201-extra_optimization.patch
    • target/linux/generic/pending-4.14/304-mips_disable_fpu.patch
    • target/linux/generic/pending-4.14/332-arc-add-OWRTDTB-section.patch
    • target/linux/generic/pending-4.14/644-net-pppoe-support-hardware-flow-table-offload.patch
    • target/linux/generic/pending-4.14/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
    • target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
    • target/linux/generic/pending-4.14/810-pci_disable_common_quirks.patch
    • target/linux/generic/pending-4.14/834-ledtrig-libata.patch
    • target/linux/pistachio/patches-4.14/412-mtd-nand-Add-JEDEC-manufacturer-ID-for-Gigadevice.patch
    • target/linux/ramips/patches-4.14/0013-owrt-hack-fix-mt7688-cache-issue.patch
    • target/linux/ramips/patches-4.14/0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch
    • target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch
    • target/linux/ramips/patches-4.14/0040-nand-hack.patch
    • target/linux/samsung/files-4.14/drivers/mtd/nand/s5pxx_nand.c
  27. Change #10764

    Category None
    Changed by Hauke Mehrtens <haukeohnoyoudont@hauke-m.de>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 6062d858929df927e244280ec4864b35a217d6d1

    Comments

    kernel: Update kernel 4.19 to version 4.19.131
    Fixes:
    - CVE-2020-10757
    
    The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
    backported which needed some adaptations to other code.
    
    Run tested: ath79
    Build tested: ath79
    
    Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

    Changed files

    • include/kernel-version.mk
    • target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
    • target/linux/ath79/files/drivers/mtd/nand/raw/ar934x_nand.c
    • target/linux/ath79/files/drivers/mtd/nand/raw/nand_rb4xx.c
    • target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
    • target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
    • target/linux/bcm47xx/patches-4.19/032-v5.4-MIPS-BCM47XX-Add-support-for-Netgear-R6200v1.patch
    • target/linux/bcm53xx/patches-4.19/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
    • target/linux/cns3xxx/patches-4.19/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
    • target/linux/generic/backport-4.19/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
    • target/linux/generic/backport-4.19/390-v5.1-sch_cake-Make-the-dual-modes-fairer.patch
    • target/linux/generic/backport-4.19/391-v5.1-sch_cake-Permit-use-of-connmarks-as-tin-classifiers.patch
    • target/linux/generic/backport-4.19/392-v5.1-sch_cake-Interpret-fwmark-parameter-as-a-bitmask.patch
    • target/linux/generic/backport-4.19/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
    • target/linux/generic/backport-4.19/394-v5.4-sch_cake-Add-missing-NLA-policy-entry-TCA_CAKE_SPLIT.patch
    • target/linux/generic/backport-4.19/396-5.8-sch_cake-don-t-try-to-reallocate-or-unshare-skb-unco.patch
    • target/linux/generic/backport-4.19/397-5.8-sch_cake-don-t-call-diffserv-parsing-code-when-it-is.patch
    • target/linux/generic/backport-4.19/398-5.8-sch_cake-fix-a-few-style-nits.patch
    • target/linux/generic/backport-4.19/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
    • target/linux/generic/backport-4.19/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
    • target/linux/generic/backport-4.19/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
    • target/linux/generic/backport-4.19/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
    • target/linux/generic/backport-4.19/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
    • target/linux/generic/backport-4.19/825-v5.8-spi-rb4xx-null-pointer-bug-fix.patch
    • target/linux/generic/backport-4.19/826-v5.8-spi-rb4xx-update-driver-to-be-device-tree-aware.patch
    • target/linux/generic/hack-4.19/207-disable-modorder.patch
    • target/linux/generic/hack-4.19/220-gc_sections.patch
    • target/linux/generic/hack-4.19/259-regmap_dynamic.patch
    • target/linux/generic/hack-4.19/260-crypto_test_dependencies.patch
    • target/linux/generic/hack-4.19/661-use_fq_codel_by_default.patch
    • target/linux/generic/hack-4.19/662-remove_pfifo_fast.patch
    • target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch
    • target/linux/generic/hack-4.19/721-phy_packets.patch
    • target/linux/generic/hack-4.19/901-debloat_sock_diag.patch
    • target/linux/generic/hack-4.19/902-debloat_proc.patch
    • target/linux/generic/pending-4.19/110-ehci_hcd_ignore_oc.patch
    • target/linux/generic/pending-4.19/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
    • target/linux/generic/pending-4.19/201-extra_optimization.patch
    • target/linux/generic/pending-4.19/304-mips_disable_fpu.patch
    • target/linux/generic/pending-4.19/332-arc-add-OWRTDTB-section.patch
    • target/linux/generic/pending-4.19/644-net-pppoe-support-hardware-flow-table-offload.patch
    • target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
    • target/linux/generic/pending-4.19/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
    • target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch
    • target/linux/generic/pending-4.19/834-ledtrig-libata.patch
    • target/linux/ipq40xx/patches-4.19/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch
    • target/linux/ipq806x/patches-4.19/0072-add-ipq806x-with-no-clocks.patch
    • target/linux/lantiq/patches-4.19/0001-MIPS-lantiq-add-pcie-driver.patch
    • target/linux/mediatek/patches-4.19/0101-pci-mediatek-backport-fix-pcie.patch
    • target/linux/mediatek/patches-4.19/0900-bt-mtk-serial-fix.patch
    • target/linux/mvebu/patches-4.19/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
    • target/linux/mvebu/patches-4.19/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
    • target/linux/mvebu/patches-4.19/526-PCI-aardvark-disable-LOS-state-by-default.patch
    • target/linux/x86/patches-4.19/200-pcengines-apu2-reboot.patch
  28. Change #10765

    Category None
    Changed by Hauke Mehrtens <haukeohnoyoudont@hauke-m.de>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 68d9cb82143b864d70e4fb3d7cbb7068f82216a1

    Comments

    kernel: Update kernel 5.4 to version 5.4.50
    Run tested: ath79, ipq40xx
    Build tested: ath79, ipq40xx
    
    Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

    Changed files

    • include/kernel-version.mk
    • target/linux/apm821xx/patches-5.4/301-fix-memory-map-wndr4700.patch
    • target/linux/ath79/patches-5.4/0005-usb-add-more-OF-quirk-properties.patch
    • target/linux/ath79/patches-5.4/910-unaligned_access_hacks.patch
    • target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch
    • target/linux/bcm27xx/patches-5.4/950-0144-rtc-rv3028-Add-backup-switchover-mode-support.patch
    • target/linux/bcm27xx/patches-5.4/950-0211-bcmgenet-Better-coalescing-parameter-defaults.patch
    • target/linux/bcm27xx/patches-5.4/950-0222-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch
    • target/linux/bcm27xx/patches-5.4/950-0283-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
    • target/linux/bcm27xx/patches-5.4/950-0295-net-bcmgenet-Workaround-2-for-Pi4-Ethernet-fail.patch
    • target/linux/bcm27xx/patches-5.4/950-0340-drm-v3d-The-third-IRQ-is-optional.patch
    • target/linux/bcm27xx/patches-5.4/950-0447-PCI-of-Add-inbound-resource-parsing-to-helpers.patch
    • target/linux/bcm63xx/patches-5.4/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
    • target/linux/generic/backport-5.4/393-v5.5-sch_cake-drop-unused-variable-tin_quantum_prio.patch
    • target/linux/generic/backport-5.4/396-5.8-sch_cake-don-t-try-to-reallocate-or-unshare-skb-unco.patch
    • target/linux/generic/backport-5.4/397-5.8-sch_cake-don-t-call-diffserv-parsing-code-when-it-is.patch
    • target/linux/generic/backport-5.4/398-5.8-sch_cake-fix-a-few-style-nits.patch
    • target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
    • target/linux/generic/backport-5.4/750-v5.5-net-phy-add-support-for-clause-37-auto-negotiation.patch
    • target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch
    • target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch
    • target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch
    • target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch
    • target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch
    • target/linux/generic/backport-5.4/812-v5.8-i2c-pxa-fix-i2c_pxa_scream_blue_murder-debug-output.patch
    • target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch
    • target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch
    • target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch
    • target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch
    • target/linux/generic/backport-5.4/819-v5.8-i2c-pxa-clear-all-master-action-bits-in-i2c_pxa_stop.patch
    • target/linux/generic/hack-5.4/259-regmap_dynamic.patch
    • target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
    • target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
    • target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
    • target/linux/generic/hack-5.4/702-phy_add_aneg_done_function.patch
    • target/linux/generic/hack-5.4/721-phy_packets.patch
    • target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
    • target/linux/generic/hack-5.4/902-debloat_proc.patch
    • target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
    • target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
    • target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
    • target/linux/generic/pending-5.4/820-libata-Assign-OF-node-to-the-SCSI-device.patch
    • target/linux/generic/pending-5.4/834-ledtrig-libata.patch
    • target/linux/ipq806x/patches-5.4/0072-add-ipq806x-with-no-clocks.patch
    • target/linux/layerscape/patches-5.4/701-net-0234-enetc-WA-for-MDIO-register-access-issue.patch
    • target/linux/layerscape/patches-5.4/701-net-0236-enetc-Replace-enetc_gregs-with-a-readers-writer-lock.patch
    • target/linux/layerscape/patches-5.4/801-audio-0008-Revert-ASoC-Remove-dev_err-usage-after-platform_get_.patch
    • target/linux/layerscape/patches-5.4/812-pcie-0002-PCI-dwc-Use-interrupt-disabling-instead-of-masking.patch
    • target/linux/layerscape/patches-5.4/812-pcie-0003-PCI-dwc-fix-the-msi-failure-after-pm-operations.patch
    • target/linux/layerscape/patches-5.4/820-usb-0005-usb-dwc3-add-otg-properties-update.patch
    • target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch
    • target/linux/layerscape/patches-5.4/820-usb-0018-MLK-18794-1-usb-host-xhci-add-.bus_suspend-override.patch
    • target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch
    • target/linux/mpc85xx/patches-5.4/102-powerpc-add-cmdline-override.patch
    • target/linux/oxnas/patches-5.4/999-libata-hacks.patch
  29. Change #10766

    Category None
    Changed by Daniel González Cabanelas <dgcbueuohnoyoudont@gmail.com>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision a902e6a657e0807da0bb5d154db2e208b7f567ef

    Comments

    mvebu: LS421DE: use automatic fan control with thermal zones
    The Buffalo Linkstation LS421DE has a chassis fan for cooling two internal
    hard drives. Currently there is no control over this fan, running always
    at fixed medium speed.
    
    With the recent jump to the kernel 5.4, now we can monitor the hard drive
    temperature and control the fan with thermal zones.
    
    Install the kmod-hwmon-drivetemp module and wire up a thermal zone on the
    dts file to allow automatic fan control by the kernel.
    
    Tested succesfully using a single Crucial BX500 SSD drive.
    
    Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>

    Changed files

    • target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
    • target/linux/mvebu/image/cortexa9.mk
  30. Change #10767

    Category None
    Changed by Scott Roberts <ttocsrohnoyoudont@gmail.com>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision d31bbe40e2573d86ed2455f5e0311b4e84286ba1

    Comments

    mvebu: config define i2c pxa slave
    We are setting CONFIG_I2C_PXA is not set
    If you do set pxa to y then you have issues if you do not have
    CONFIG_I2C_PXA_SLAVE is not set
    
    Fixes: dd13add3ceed ("kernel: i2c-pxa: remove slave")
    Signed-off-by: Scott Roberts <ttocsr@gmail.com>

    Changed files

    • target/linux/mvebu/config-5.4
  31. Change #10768

    Category None
    Changed by John Audia <grayskyohnoyoudont@archlinux.us>
    Changed at Sat 04 Jul 2020 19:12:42
    Repository https://git.openwrt.org/openwrt/openwrt.git
    Branch master
    Revision 556eb9872d017bb98477f8436152805124fa639d

    Comments

    linux-firmware: Update linux-firmware to 20200619
    git log --pretty=oneline --abbrev-commit 20200122..20200619
    
    e96c121 (tag: 20200619, origin/main) amdgpu: update renoir firmware from 20.20 release
    db0402e amdgpu: update picasso firmware from 20.20 release
    c4e6e8f amdgpu: update raven2 firmware from 20.20 release
    1967282 amdgpu: update raven firmware from 20.20 release
    f73f82c amdgpu: add vega20 TA firmware from 20.20 release
    9ecaba8 amdgpu: update vega20 firmware from 20.20 release
    3866af1 amdgpu: update vega12 firmware from 20.20 release
    adba945 amdgpu: update vega10 firmware from 20.20 release
    3c5eef0 amdgpu: update navi10 firmware from 20.20 release
    152c929 amdgpu: update navi14 firmware from 20.20 release
    3890db3 (HEAD -> master, origin/master, origin/HEAD) rtl_nic: add firmware for RTL8125B
    887d2a1 linux-firmware: Update firmware file for Intel Bluetooth AX200
    3914943 linux-firmware: Update firmware file for Intel Bluetooth AX201
    4966923 linux-firmware: Update firmware file for Intel Bluetooth 9560
    5ee82c0 linux-firmware: Update firmware file for Intel Bluetooth 9260
    d9880b1 Mellanox: Add new mlxsw_spectrum firmware xx.2007.1168
    c2e313b rtw88: RTL8822C: update firmware version to v9.9
    4d91664 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware
    a54dfbe Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
    51a773d cxgb4: Update firmware to revision 1.24.17.0
    5611000 mrvl: add firmware for Prestera ASIC devices
    8ba6fa6 (tag: 20200519) Merge tag 'iwlwifi-fw-2020-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
    5ee1c7d iwlwifi: update and add new FWs from core50-70 and core52-81 releases
    401bd6d rtw88: RTL8821C: add firmware file v24.5
    2ae9974 iwlwifi: update FWs to core47-142 release
    50c1340 iwlwifi: update 8265 FW
    f8d32e4 rtw88: update firmware information and README
    412f95a linux-firmware: add firmware for MT7915E
    619d339 QCA: Add Bluetooth firmware for QCA9377
    1392591 linux-firmware: add rebb firmware for mt7663
    b2cad6a linux-firmware: Update firmware file for Intel Bluetooth AX200
    c5ac1ad linux-firmware: Update firmware file for Intel Bluetooth AX201
    642d115 linux-firmware: Update firmware file for Intel Bluetooth 9560
    dc3047c linux-firmware: Update firmware file for Intel Bluetooth 9260
    78c0348 (tag: 20200421) Use Link function for brcmfmac43362-sdio.lemaker,bananapro.txt
    f2df706 Add symlink for Dell XPS 15 9550 Broadcom Bluetooth patch-ram file
    87dcb0e rtl_bt: Update RTL8822C BT FW to 0x0999_3AA1
    3aa3ae4 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
    8aa36f5 cxgb4: Update T6 config file
    6314fa0 amdgpu: update vega20 firmware for 20.10
    1f308f1 amdgpu: update vega12 firmware for 20.10
    1ffd569 amdgpu: update vega10 firmware for 20.10
    9a0b0f4 amdgpu: update renoir firmware for 20.10
    428a747 amdgpu: update raven2 firmware for 20.10
    624ecdf amdgpu: update raven firmware for 20.10
    7532f50 amdgpu: update picasso firmware for 20.10
    75e352e amdgpu: update navi10 firmware for 20.10
    3c175d1 amdgpu: update navi14 firmware for 20.10
    8d7ac32 amdgpu: add navi14 TA firmware from 20.10
    dd6b4db Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
    3afe520 cxgb4: Update firmware to revision 1.24.14.0
    64dba0f Merge branch 'a630-zap' of https://github.com/andersson/linux-firmware
    236ec45 linux-firmware: add firmware for MT7663 Wifi/BT combo device
    107b9a2 Merge https://github.com/bgodavar/qca_bt_fw
    5b240e5 Merge https://github.com/rjliao-qca/qca-btfw
    47533bc linux-firmware: Update firmware file for Intel Bluetooth AX200
    677930a linux-firmware: Update firmware file for Intel Bluetooth AX201
    e6ff1e7 qcom: Add SDM845 Adreno ZAP shader firmware
    1a8b0dc qca: Enable transparent WBS for WCN3991
    4921f73 QCA: Add Bluetooth firmware for QCA6390
    edf390c Merge branch 'v12573.77' of https://github.com/erinlo/linux_fw_scp
    3c213aa mediatek: Add mt8183 SCP firmware
    8eb0b28 (tag: 20200316) linux-firmware: Update firmware file for Intel Bluetooth AX200
    b9f720f linux-firmware: Update firmware file for Intel Bluetooth AX201
    426db50 linux-firmware: Update firmware file for Intel Bluetooth 9560
    9361709 linux-firmware: Update firmware file for Intel Bluetooth 9260
    3b3dd5a amdgpu: update vega20 firmware from 19.50
    4871e7a amdgpu: update vega12 firmware from 19.50
    4e7f0f8 amdgpu: update vega10 firmware from 19.50
    fce60a9 rtl_bt: Add firmware and configuration files for RTL8822C BT UART chip
    d553c05 Merge branch 'tgl_huc_7.0.12_dmc_2.06' of git://anongit.freedesktop.org/drm/drm-firmware
    fb83402 i915: Add DMC firmware v2.06 for TGL
    45d36b5 i915: add HuC firmware v7.0.12 for TGL
    0148cfe Merge https://github.com/rjliao-qca/qca-btfw
    94cb0a6 check_whence: python3/utf-8 support
    7fa32bc Makefile: improve `make check` usefulness
    4bb6805 mediatek: Remove in-tree symlinks
    6f50efe Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu
    2db3978 qca: Fix blueooth firmware name for QCA6174
    a8a18d1 mediatek: move MT8173 VPU FW to subfolder
    efcfa03 linux-firmware: Update firmware file for Intel Bluetooth AX201
    83cb43e Merge https://github.com/bgodavar/qca_bt_wcn3991
    54b017d qca: Add firmware files for BT chip wcn3991.
    2277987 nvidia: add TU116/117 signed firmware
    f63922d drm/amdgpu: update to latest 19.50 firmware for raven
    1168a90 Merge branch 'v1.1.4' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.4
    0bd965d mediatek: update MT8173 VPU firmware to v1.1.4
    6f89735 rtl_nic: update firmware for RTL8153A
    5351afe rtl_bt: Update RTL8822C BT FW to V0x0998_C2B4
    83a7c50 linux-firmware: add firmware for MT7622
    feb91a4 linux-firmware: add version 2 for MT7615E
    b791e15 amdgpu: update to latest navi10 firmware from 19.50
    0ff2f37 Revert "radeon: update oland rlc microcode from amdgpu"
    c2df39a Merge branch 'amlogic-vdec' of https://github.com/Elyotna/linux-firmware
    fb505a6 amlogic: update video decoder firmwares
    6d9f399 amdgpu: add renoir firmware for 19.50
    2c08b38 amdgpu: update raven2 firmware for 19.50
    8846543 Merge commit '779514ec044a75ee6c9c20e52a2bf291f80d7d4e' of https://github.com/Netronome/linux-firmware
    74d71b6 Merge branch 'bt-20200122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
    779514e nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.12.A.13
    3055060 qca: update bluetooth firmware for QCA6174
    
    Signed-off-by: John Audia <graysky@archlinux.us>

    Changed files

    • package/firmware/linux-firmware/Makefile